UmbraX Pro Help

Last updated: 13 November 2026

What UmbraX Pro does, and how to use it.

Contact support

UmbraX Pro: the app

Why UmbraX Pro

Elite training. Already in your hand.

Every player asks the same question: am I getting better? UmbraX Pro answers it.

Choose from built-in drills and fitness tests, or make your own. Every drill has a set structure, so it's the same drill wherever you train: your backyard, the park, practice.

When the drill stays the same, the numbers compare. Your phone times every lap and every rep, and a smartwatch adds your heart rate. Every set goes on your chart, and your report tells you if you're improving.

And we're working on a drill marketplace: elite players share the drills they actually train with, so any player, anywhere, can set them up exactly as they do.

You put in the work. UmbraX Pro shows it.

Start now: take the test drive in Start here on Home (closed it? tap Show Start here on Home in Profile). Then tap a category on Home and choose from the built-in drills and tests (see "Start here: the test drive" and "Find a drill").

What UmbraX Pro does

For players

  • Drills, ready when you are. Built-in drills and fitness tests for speed, agility, reaction, power, endurance, mobility and skill on the ball. Pick one and train.
  • Any drill, made yours. Measure a drill once with your camera, or type in its distances, and write how it's done. It's saved with its whole structure: what you do, how it's scored and where everything goes. Keep your own videos and links of the move beside it.
  • The same drill, wherever you train. Your camera shows on the ground where everything goes, at the right distances and angles. Your backyard, the park and practice become the same drill.
  • Every lap, timed. Tap the screen, let a partner tap, say "lap" or tap your watch. No camera watches you during a set, and nothing counts for you: you mark each lap or rep, and the app times it. Run a time trial, a fixed time or intervals, with beeps that count you in and out. In a Reaction drill, the app calls the target out loud and times every rep.
  • Your heart, on your wrist. With a smartwatch: heart rate through every set, how fast you recover after, your fitness on drills scored by laps or reps, and GPS speed and distance on Top Speed Run and Cooper Run. These are estimates for your own training (see "What do the numbers mean?").
  • Know where you stand. Fitness tests give you a starting number (they're hard: see "Watch tests and fitness tests"). Take the same test every 6 to 8 weeks to see how far you've come.
  • A week that's ready for you. Plan your week once and it repeats. Home shows today's plan, Up next has the next drill waiting, and a daily guide for your age shows how many sets and minutes you've done today.
  • See if you're getting better. Every set goes on the drill's chart. A set tells you when it's a New best, and each drill's report says whether you're Improving, Steady or Dipping.
  • Your record, yours. No account, no ads. Your drills and sets stay on your phone and, if iCloud Drive is on, in your own iCloud (see "Backup and a new phone").

The drill marketplace

We're working on a marketplace where elite players and coaches share the drills they actually train with.

  • Train the way they train. Every drill keeps its structure, so you set it up exactly as they do: the same distances, the same angles, on your own field.
  • Learn it from them. Their steps, in their own words, with their video of the move.
  • Their time on it. Each drill comes with the time they ran on it: what they did that day, not a target you should expect to reach.
  • Coaches, share your best. Publish the drills you're known for, and players anywhere set them up and train them your way.

For coaches, teams and clubs

Today: pick the drills your players do between sessions. Each player adds them to My drills and puts them in My week (see "Find a drill" and "Plan your week"). Built-in drills with cones come measured, so every player sets out the same cones at the same distances, wherever they train. For a drill of your own, write its lengths and turns on the whiteboard, and each player types it in once (see "Make a drill"). Tell everyone which set to run, such as a Time trial of 5 laps, so their times compare week to week. At the next session, each player shows you their report.

Next: we're working on tools that take your club's training home with every player:

  • Homework that counts. Send your team's week straight to every player's app. A drill is done only when the player has run it, never from a tick box.
  • See who trained, and who's improving. Each player is measured against their own start, not ranked against teammates. A brief every Monday: who trained, new bests to celebrate, who needs a nudge. Send kudos with one tap.
  • Build drills at your desk. Draw a drill to scale on a pitch, and every player sets it up the same on any field. Print a setup card with a QR code that opens it in the app.
  • Practice that fits your field. Put drills into a session, and the planner fits them onto the space you have, lists the kit and runs the clock from your phone at the touchline.
  • Your club's way, on every team. Pick the club's standard drills and test weeks, map your drills and videos to your principles by age group, and share a season report with your board and parents showing what was measured.
  • Tactics players understand. Turn a game idea into a short tactical video: each player sees their own job and answers one question. You see who got it.
  • Parents in the loop. Parents give consent, see their child's week, and see every note a coach sends their child.

Getting started

The first time you open UmbraX Pro, it asks two things before anything else:

  1. What year were you born? The app uses your age group to suit training to you: it sets the daily guide for sets, and under 13 it turns on child mode (see "Children and parents").
  2. The Terms. Read them and tap Agree and continue. If you are under 18, a parent or guardian reads them and taps Parent or guardian: I agree. If we change the Terms in a way that matters, the app says "We've updated our Terms" and asks again.

Then you're on Home:

  • The line under the greeting opens My week, your plan for each day. It says Plan your week until you make one, then today's plan, such as Today · 3 drills, 7 sets (see "Plan your week").
  • Start here is a test drive of the app in three drills, or two in child mode (see "Start here: the test drive" below).
  • Create a drill makes a new drill of your own.
  • Categories are the kinds of training (Speed with ball, Speed, Agility, Reaction, Power, Endurance, Mobility, Technical skills, Finishing). Each has built-in drills ready to use. The last tile, New category, makes a category of your own (see "Make a category of your own").
  • How it works shows the four steps: Set up, Run, Beat it, Progress.
  • Continue shows drills you started and didn't finish.
  • My drills holds the drills you made or added. Recent shows the last 10 you ran (until you run one, My drills opens on All), Favourites the ones you starred.
  • What's next shows features we are building (see "What's next").

Your sport is at the top right, and your profile is the round button next to it.

Distances and speeds show in metres and km/h, or feet, miles and mph, as your phone's region uses. To change them, go to Profile and pick Units.

Start here: the test drive

Start here on Home shows you the app in three drills, each a step further. In child mode, it's the first two, with no Top Speed Run. Tap a drill to add it to My drills and open it.

  1. Toe taps needs a ball. It shows you how a set works: tap Start set, read the safety note and tap I understand, then do quick touches on the ball for 30 seconds. There's nothing to tap on the phone. When the set ends, rate how clean it was, 1 to 5.
  2. Shuttle with ball needs 2 cones and a ball. Tap Set it up on the field, and your phone's camera shows where the 2 cones go, 5 m (16 ft) apart (see "Set up a drill on the field"). Then tap Start set. No cones? Use any 2 soft, low markers.
  3. Top Speed Run needs a smartwatch and an open field outdoors. It opens the test's page, and you start it on your watch (see "Watch tests and fitness tests"). Warm up first.

The next step is outlined. A step gets a tick once you've done a set of its drill, in any order. Top Speed Run gets its tick when the result reaches your phone. The card goes away when every drill on it is ticked.

No smartwatch? Do the first two, then close the card with ✕. Once you close it, it stays closed on this phone. To see it again, tap Show Start here on Home in Profile; it then stays, with its ticks, until you close it. The drills are still in their categories: Toe taps in Technical skills, Shuttle with ball in Speed with ball and Top Speed Run in Speed.

Your phone and smartwatch

UmbraX Pro asks for a permission only when a feature first needs it, never when you open the app. You can say no and still use the rest of the app.

PermissionAsked whenIf you say no
Camera (phone)You first measure a drill, set one up or record a video for My guidesType the distances in instead, and set the cones out with a tape measure. For a video in My guides, use Choose from Photos
Microphone and Speech Recognition (phone)You turn on Voice lapsTap LAP instead. What you say is heard on the phone and never recorded
Microphone (phone)You first open Record for a video in My guidesThe video is recorded without sound
Photos (phone)You first keep or choose a video for My guidesYou can't keep or choose videos for My guides, and the ones on your drills show Not in Photos. Web links and everything else work
Health: heart rate, and starting workouts (smartwatch)You first open a drill or test on the watchTiming still works, without heart rate. The workout only keeps the watch awake, and it isn't saved to Apple Health
Health: running distance (smartwatch)Your first Top Speed Run or Cooper Run on the watch, with locationThe watch works out the distance from GPS alone
Location (smartwatch)Your first Top Speed Run or Cooper Run on the watchThe watch can't measure your speed or distance

UmbraX Pro never asks for notifications, contacts or tracking.

Changing your mind

  • Camera, microphone, speech recognition and Photos: your phone's Settings > Apps > UmbraX Pro.
  • Health: in the Health app, tap your picture at the top right, then Apps, then UmbraX Pro.
  • Location for the watch tests: your phone's Settings > Privacy & Security > Location Services > UmbraX Pro.

Getting the app on your smartwatch

The watch app installs with UmbraX Pro on your phone if Automatic App Install is on in the Watch app on your phone. If it isn't, open the Watch app, tap My Watch, scroll to Available Apps and tap Install next to UmbraX Pro.

The watch shows your drills only after you've given your birth year and agreed to the Terms on the phone.

During a set

  • The screen stays on while you measure, set up and run a set, so you can put the phone down face up.
  • The beeps, and a Reaction drill's calls, play even when your phone is on silent, and over your music. Use the volume buttons to change how loud they are.
  • On the watch, you can keep your wrist down: the app keeps running and buzzes when it needs you. If the watch screen dims, the time keeps counting in whole seconds; raise your wrist to see tenths again.

How drills work

Every drill answers two questions: what do you do, and how is it scored? The labels under each drill show both, in that order.

What you do

  • Route: follow a fixed path through the cones, the same every lap, such as a slalom.
  • Reaction: start at home. The app calls out a cone at random; go to it and back. It needs at least 3 cones.
  • Area: move freely inside the cones, such as a rondo, a small game or close control in a box.
  • No layout: no cones at all, such as juggling, push-ups or a plank.

How it's scored

  • Laps: tap LAP each lap. You get lap times and speed.
  • Reps: tap REP each rep. You get reps a minute. In a Reaction drill, tap REP when you're back home: each call is a rep, timed from the call, and you get rep time and speed.
  • Hold: tap DONE when you can't keep good form any longer. You get the seconds held, such as for a plank or a wall sit.
  • Flow: nothing to tap, for moves too fast to count. After the set, you rate how clean it was, 1 to 5.

Each kind of drill can be scored in these ways:

What you doHow it can be scored
RouteLaps or Flow
ReactionReps
AreaReps or Flow
No layoutReps, Hold or Flow

A drill has one score. You choose it when you make the drill, and every set uses it, so your sets compare. To change it, see "Change a drill". With your smartwatch, Laps and Reps also give your fitness on this drill (see "What do the numbers mean?"). Hold and Flow give heart rate and recovery.

Variations

A variation is the same drill done another way, such as inside foot, then outside foot. Each one has its own steps. On a Route drill, a variation can also take its own route through the same cones. A drill can have up to 12 variations, the drill's own included (see "Free, Pro and Pro Family"). A Reaction drill has none: its calls already change every rep.

  • Every set runs all the variations, in order.
  • In a Time trial, each variation does the laps or reps, one after the other on one clock. In Fixed time, each gets the time you set. In Intervals, pick the Order: In turn, where each round is the next variation and you choose how many times through, or One at a time, where you do every round of one variation before the next.
  • In a Time trial of a drill with several variations, you can rest after each lap or rep: set it on the drill's page above Start set. At 0 it says Straight on after each lap (or rep). The rest counts down on screen, then a beep tells you to go. It isn't timed, and a tap during it isn't counted.
  • In Fixed time, and in a Hold drill, you choose the time between variations to get ready, on the drill's page above Start set. 0 goes straight on. In Intervals, the rest between rounds is your time to change.
  • Add or remove variations before your first set: to remove one, tap ... on its row, then Delete, or pick it on the instruction and tap Delete this variation (its guides come off the drill; its videos stay in your Photos). You can reorder them any time: tap ... on a variation's row on the drill's page, then Move up or Move down, or pick it on the instruction and tap Move earlier or Move later. Each keeps its steps, route, past sets and guides; the one moved to the top becomes the drill's main variation. A variation with its own route can't go first, because the first one always runs the drill's route. After your first set you can still change a variation's name and steps (tap ... on its row, then Change) and its place, but you can't add or remove one, so every set compares like with like. To do that, clone the drill (see "Change a drill").

The labels on a drill

In My drills and a category's drills, each drill has a line of small icons under its name: how it's scored (Laps, Reps, Hold or Flow), what you do (Route, Reaction, Area or No layout, or a watch for a Watch test), then the number of variations, if it has more than one, and a red flame for an All-out drill. The drill's page shows them in words. In My drills, the right of each drill shows how it's going: its change since your first 3 sets, such as +11%, or a watch test's best. Tap ⓘ beside My drills, or at the top left of a category, to see what each icon means.

A built-in drill's page shows the full labels: what you do, the score, the variations, Own routes when a variation has its own route, and All-out. Once you've added it, its button says In my drills. Your own drill's page shows the layout's lap, size and objects, your best and how many sets you've done.

Built-in samples to copy

The built-in drills show most kinds. Open one to see its labels, its variations and its steps, then make yours the same way.

SampleCategoryWhat it showsCopy it for
SlalomSpeed with ballRoute, Laps, 3 variationsDribbling the same path, timed, a few ways
Figure 8Speed with ballRoute, Laps, a variation with its own routeThe same cones, run in a different order
Left or right callsReactionReaction, RepsReacting to a call and going to that cone
Wall passesTechnical skillsNo layout, Reps, 3 variationsCounting touches or passes, with no cones
Squat jumpsPowerNo layout, Reps in IntervalsRounds of an exercise, counted
PlankPowerNo layout, Hold, 3 variationsHolds, one after another
Toe tapsTechnical skillsNo layout, FlowFast footwork with no cones
Quick feetAgilityNo layout, Flow in IntervalsFast footwork in rounds, too fast to count

No built-in drill is an Area drill, or a Route drill scored by Flow: to make one, see "Make a drill". A built-in drill's variations are fixed. To train your own way, make your own drill with Create a drill.

Find a drill

  1. On Home, tap a category under Categories.
  2. Look through its built-in drills, if it has any. Under them, Yours lists your own drills in it, and Make your own starts a new drill in it.
  3. Tap a drill to see what it needs and how to do it, then tap Add to my drills. If it has variations, tap one to see its steps.

To add several at once, tap Select on Add several at once, tap the drills you want, then tap the add button, such as Add 3 to My drills.

Drills you add show under My drills on Home. Tap one to open it and run it. Touch and hold a drill for more: Favourite, Report (your progress on it) and Remove from my drills. A drill of your own that you remove stays under Yours in its category: touch and hold it there and tap Add to my drills to bring it back.

Make a drill

Lay the cones out on the ground first. Then tap Create a drill on Home and pick what the drill trains (or make a New category for it), or tap Make your own on a category's page. Then choose how to give the layout:

  • Measure with your camera: walk from object to object with your phone.
  • Type it in: enter each length and turn, without being on the field.
  • No layout: for drills with no cones, such as juggling, wall passes, a plank or mobility.

Not sure how to set yours up? Find a built-in drill like it and copy its pattern (see "How drills work").

Measuring with your camera

  1. Read Before you walk and tap Got it. You'll be looking at your phone as you walk: walk slowly and look up often.
  2. Pick the object (cone, pole, hurdle and more), aim at the base of the first one and tap Set A.
  3. Walk to the next object. The distance and turn show as you go. Aim at its base and tap Set B, and so on. Each object is measured from the one before.
  4. When you've set them all (2 or more), tap Done at the top of the screen.

To measure the next one from another object, aim at that object: the aim snaps to it and the button says Measure from B (or its letter). Tap it, then walk to the next object. You can also pick it in the menu, under Measure the next one from. This suits a layout of cones at fixed spots, such as a box with cones in the middle.

On Review layout, tap Keep measuring to go back and set more objects, or set one again. The objects you set are still there, and the name and choices you made on the review are kept.

If you set one in the wrong place, tap undo, or use the menu to set it again. If you know a length, tap Type to enter it instead.

For the best result, measure in good light, on ground with some texture (grass, a court with lines), and move the phone slowly. If a yellow hint shows, such as Move the phone more slowly or Point at the ground, in good light, do what it says. If tracking is lost, aim at the last object and set it again.

Review and instructions

  1. On Review layout (Name and set for a drill with no layout), give the drill a name.
  2. Choose What you do: Route, Reaction or Area (see "How drills work"). A drill with no layout skips this.
  3. Choose How is it scored?. Only the scores that suit what you do are shown.
  4. You can also tap a leg to change its length or turn, tap Round to 0.1 m and 5°, mark the drill All-out effort if it is a flat-out sprint, and choose its Default set.
  5. Tap Next: how it's done, then Type the steps.
  6. Write the Steps, and if you like Coaching points and Common mistakes. Each can be a list or free text (tap Text or List).
  7. To add a variation, tap Add under Variations (not for a Reaction drill), give it a name and write its steps. A variation with no steps isn't kept. Coaching points and common mistakes are shared by every variation.
  8. Tap Save drill.

What you do decides the rest of the review:

  • Route: choose the route (Loop, Out and back or One way) and drag the objects into order. Each lap is timed, and your speed comes from the lap's length. To give a variation its own route, tap Route under its name on the instruction, turn on Its own route and set its order.
  • Reaction: under Calls, choose home and type the word called for each target, such as a colour, Left or a number. Up to 8 targets. Leave a word empty to never call that object.
  • Area: the objects stay at fixed spots, with no order, such as a grid for a rondo, a small game, a 1v1 box or cones to pass between. Write in the steps what counts as a rep, such as a goal or a pass. There's no speed. Intervals suit rounds of a game. One phone times the rounds for everyone, and heart rate comes from whoever wears the watch.

You can add variations later from the drill's page with Add another variation (Add a variation once it has some), until your first set.

Your drill is saved as a draft as soon as its layout exists. If you close before saving, tap Save draft, and carry on later from Continue on Home.

Change a drill

To change a drill of your own, open its category, touch and hold the drill, and tap Edit. You can change everything you chose when you made it: the name, category, what you do, the score, the route, the default set, the instruction and the cones (tap Add, remove or change cones under Layout and type them in; there's no measuring again). Tap Save drill when you're done, or ✕ and Discard changes to leave it as it was.

Even after sets, you can still change each object's type (cone, pole and so on), its distance from the one before and its turn: open the drill, tap Distances and turns, then Change distances and objects, and tap Done to save. Your earlier sets stay, but they were on the old distances, so new laps may not compare with them; to keep them apart, clone the drill and change the copy instead.

Edit is there until the drill's first set, so every set compares like with like. After that, tap Clone: it makes a copy with no sets, named with "copy" after the name, and opens it. To change the copy, touch and hold it in its category and tap Edit. Clone is in the touch-and-hold menu, and on the drill's page as Clone drill, under the variations.

Make a category of your own

To group your drills your own way, such as Weak foot, make a category. Tap New category: the last tile under Categories on Home, or the last tile when you pick what a new drill trains (the drill then goes in it). Give it a Name, pick a Colour and, if you like, a photo with Choose a photo, then tap Save. It shows on Home with the others, with its photo on the tile.

To change it, open it and tap the pencil at the top left, beside ⓘ. Delete category is there too, and works once the category has no drills. To move a drill to another category, touch and hold it, tap Edit and pick its Category. That works only until the drill's first set (see "Change a drill"), so a drill with sets stays where it is until you delete it.

The app keeps its own small copy of the photo, so it stays on the tile even if you delete it from Photos. Your categories, with their names, colours and photos, go to your iCloud Drive and your backup files with your drills (see "Backup and a new phone").

My guides to the move

To remember how a move is done, keep up to 6 guides to it on the drill's page, under the steps, in My guides: videos of you doing it, and links to web pages, such as a video online, in any mix. A drill with variations has 6 for each: tap a variation to see its guides. It works on every drill you made or were sent, on Free and Pro. A built-in drill has Guides instead, for guides from UmbraX Pro. You can't add your own there, and there aren't any yet: we're working on them. You can also add your own guides while you make a drill or a variation, under the steps on the Instruction step; that's optional.

  • Record: tap Add guide, then Record. Stand the phone up where it sees you. Tap the timer, left of the red button, to start Now or after 3 s, 5 s or 10 s (with a beep each second), and the button on the right for the front camera. Tap the red button to record. It stops by itself at 1:00, or tap it again to stop. Your take plays back on a loop (tap it to pause): tap Keep video to save it to your Photos, or the round arrow beside it to record again.
  • Choose from Photos: tap Add guide, then Choose from Photos, and pick any video, such as one in slow motion from the Camera app. If you gave UmbraX Pro Limited Photos access and it asks to Allow this video, tap Allow video and select the video again.
  • Add a link: tap Add guide, then Add a link. Type or paste the Web address (you can leave out https://) and, if you like, a Title, then tap Save. Without a title, the guide shows the site, such as youtube.com. Save works only for a web address (http or https), and the same link can't be added twice.
  • Watch: tap a video to play it full screen. Tap a link to open it in Safari.
  • Change or remove: touch and hold a video for Replace or Remove, or a link for Open in Safari, Edit link or Remove. Remove takes it off the drill; a video stays in your Photos.

Your videos stay in your Photos: the drill keeps only a link to each one, and the address and title of each web link. Only you see your guides in the app: it never sends them to us, and they're never in a drill you share. The app doesn't open or load a web link until you tap it, and then Safari opens it. Film only yourself. In child mode, Add a link and Edit link aren't there; links already on a drill still show and open.

If you delete the app, your videos stay in Photos, and your guides come back with your drills (see "Backup and a new phone"). If you delete a video in Photos, the drill shows Not in Photos: touch and hold it to replace or remove it. A video kept only in iCloud Photos needs the internet to play.

Set up a drill on the field

Open the drill and tap Set it up on the field. Your phone's camera shows where each object goes.

  1. Check the space it needs (shown at the top), and that the ground is open, flat and clear. Tap It fits, start placing.
  2. Aim at the ground. The whole layout shows there as you aim, with A under the aim and A to B straight ahead, the way the top of the phone points, and the route between the markers (round a cone where the picture goes round it). Move or turn until it fits your space, clear of goals and walls, then tap Set A.
  3. The layout stays where it was. Tap Set direction to keep it, or first turn and aim away from A to point it another way. To set it out the other way round, tap the mirror button beside undo: every left turn becomes a right turn, with the same distances, such as a drill made for the right foot set up for the left. Tap it again to go back.
  4. Walk to each marker and put the object on it. A marker turns green when you're within 10 cm (4 in). Tap Done.

Without the camera, set the objects out with a tape measure, using the lengths and turns on the drill's page.

For a Reaction drill, the drill's picture shows each target in its colour, and Distances and turns lists each target with its call, such as "A → B Red". Put the matching cone on each marker.

Run a set

  1. Open the drill. Choose the set: Time trial (a number of laps or reps, as fast as you can), Fixed time (as many as you can in the time) or Intervals (rounds of work and rest). A Hold drill has As long as you keep good form, and a Flow drill has Fixed time or Intervals. The drill opens with the set you chose last time.
  2. Tap Start set. After Get ready and a 3-2-1 countdown with beeps, go.
  3. Tap the big button (anywhere on it): LAP each lap, REP each rep, or DONE when you can't keep good form any longer. A Flow drill has nothing to tap: it shows Keep it flowing. Tap End set to stop early and keep the set. To leave instead, tap ✕: the app asks End this set?, and Save and close keeps what you did as a set stopped early, Discard set keeps nothing, and Keep going carries on. To see the steps during the set, tap i at the top left.

Variations: the name of the variation you're on shows at the top, and the next one starts by itself. In a Hold drill, Get ready counts down to each next hold.

Reaction drills, such as Left or right calls in Reaction: the app says each call out loud and shows it big (with a dot in its colour, when the call is a colour). Go to that target, come back home and tap REP. Each rep is timed from the call to your tap. The next call comes a moment later, after an uneven pause, and never calls the same target twice in a row. The next call waits for your tap, so if you forget, tap REP to carry on. A tap with no call waiting, or in the first half second after a call, doesn't count. No call comes in the last 2 seconds of a set or round, or in an Intervals rest.

Your speed comes from how far each target called is from home, there and back, so near and far calls even out. Rep times don't: a near target makes a quicker rep. For your best rep and average rep to compare from set to set, put every target the same distance from home.

Turn the volume up: the calls play over music and with your phone on silent, like the beeps. They don't turn your music down, so keep it quieter than the calls. Listen for the call rather than looking at the phone, so your eyes stay on the space around you.

Voice laps: turn it on to say "lap" (or "count") for a lap and "stop" to end the set, instead of tapping. In a Hold drill, say "lap" when you break the hold. A Flow drill has no voice laps. It works best with AirPods, or with the phone near you. Use Test to check it hears you. Voice can miss a word or be late when you're quick or out of breath, so for fast sets, tap, or have someone tap for you.

When the set ends, you see your time, laps, speed and best lap.

  • A Hold drill shows Held in all, your Longest hold and how many Holds, and tells you when it's your longest hold yet.
  • A Flow drill asks How clean was it? (How clean was each? with several variations): tap 1 for scrappy up to 5 for clean and quick. Your rating is the drill's score, so rate it before you leave this screen: a set with no rating isn't charted.
  • In Intervals, or Fixed time with several variations, a drill scored by reps (not a Reaction drill or the Twenty Minute Test) shows Reps in round during each rest, in place of REP. With no rest or time between them (0), it doesn't show. Tap − or +, or tap the number to type it, to put that round right if you missed a tap or tapped twice. Fewer drops your last taps; more adds the missing reps over the rest of the round. It shows only in the rest straight after the round.
  • After the set, the result shows Reps by round for a reps set of Intervals or Fixed time where you tapped (Reps done for Fixed time with one variation; not in a Reaction drill or the Twenty Minute Test): put any round right, the last one too, with −, + or by tapping the number. The reps, reps a minute and how the set compares change with it. You can do this only on the result, before you start the next set or leave the drill.
  • If you didn't tap any reps, add them under Reps done (a counter for each variation, when it has several). You can also add them later from the report (see "Your progress").
  • Cooper Run · Manual and the Twenty Minute Test show their own result instead.

Under Set done (or Stopped early), a card tells you when you've set a New best lap (or rep), your fastest yet on this drill by at least 0.01 seconds, or were Faster than last time: your average lap (or rep) beat your last set of the same kind (for a Time trial, one with the same number of laps or reps). After your first set on a drill, it says these are your numbers to beat. With several variations, By variation shows each one's result and marks a New best, and the card names the variation with the biggest one. A set of several variations has no Faster than last time or first-set card. Hold and Flow drills don't get the New best, Faster than last time or first-set cards; a Hold drill tells you when it's your longest hold yet instead.

If you wore your watch, you also see your heart rate, the zone you trained in (from your birth year, 13 and over), your recovery a minute later (stay still for it) and, except in a Hold or Flow drill, your fitness on this drill.

You can add How hard was it?, Technique stars (Ball control in Speed with ball, Technical skills and Finishing; a Flow drill has its rating instead) and a Note. Notes go to your iCloud and backups with your sets, so keep private health details out of them. Tap Next set to go again. To change the set first, or to delete the set you just did, tap ... beside Next set, then Change set or Delete this set.

Above Start set, the daily guide shows how many sets and minutes you've done today for your age group. It's a guide, not a rule: when you reach it, rest and come back tomorrow.

The app shows a safety note before your first set, the first time you run an All-out drill (every set, in child mode), and before every Cooper Run · Manual and Twenty Minute Test. Read it, then tap the button to start. It's a reminder, not a check that you're ready.

Plan your week

My week sets out what you train each day. Open it from the line under the greeting on Home: it shows today's plan, such as Today · 3 drills, 7 sets, or Plan your week before you've made one.

  1. Tap a day on the strip at the top. It shows 7 days, starting with today, so each day is the coming one, such as next Monday.
  2. Tap Add drill and pick drills from My drills, from any category: mix speed, ball work and mobility on one day if you like. Tap a drill again to take it off. Added built-in drills and watch tests are there too.
  3. Set how many sets of each with the sets button under its name.

To change the order, touch and hold a drill and drag it. Swipe left to remove it. A day with no drills is a rest day. Tap … at the top left to copy a day to other days, or clear it. Your week repeats every week until you change it.

Training from your plan: on today, tap ▶ beside a drill to go straight into a set, or tap the drill to open its page first (to set it up on the field or change the set). A watch test opens its page, and you start it on your watch. A drill ticks off when you've saved its sets today, and the ring shows how many of today's sets are done. After a set, the result shows how many more sets of that drill you planned, or Up next with the next drill: tap it to start. When the plan is done, it says so. Once you reach the daily guide, it says Daily guide reached: rest now instead, and doesn't offer the next drill. Closing a drill, or the drill maker, takes you back to where you opened it: My week, a category's page or Home.

The strip marks each day: a tick when today's plan is done, a circle for a day with drills planned and a dash for a rest day.

If a day has more sets than the daily guide for your age group, My week says so. Spread them over the week.

Your progress on the plan: once you have a plan, the line on Home becomes a card. At first it shows how much of each week's plan you did and says your progress line starts after about 2 weeks of sets; then a small chart appears. The big number under Since you started, such as +8%, is how much better you are at your planned drills than when you began, with Improving, Steady or Dipping. Each drill is compared only with itself: its latest sets against its first 3, by the number its report charts (speed, reps a minute, seconds held, your clean rating, or a test's top speed, distance or level). Then every planned drill counts the same, however often you do it. The bars under the line show how much of each week's plan you did. In My week, the % beside each drill is that drill's own change since you started. It's a guide to your own progress, not a score to compare with other players.

Your smartwatch

The UmbraX Pro watch app runs on Apple Watch.

Open UmbraX Pro on your watch to see your drills, and under Tests the watch tests you've added. With more than 6 drills, they're under Favourites, Recent and All drills.

  1. Tap a drill. It opens on your phone too.
  2. Tap Start. After the countdown, tap LAP for each lap (REP for each rep, DONE to end a hold). On a watch that supports double tap, you can double tap instead.
  3. Tap Stop to end the set. The watch shows your time, laps (or reps) and best lap (or rep), and your heart rate goes to your phone.

In a Hold drill, the watch shows Get ready with a countdown, taps your wrist for the last 3 seconds, buzzes at the start, then shows Holding and your time. The set ends when you tap DONE on the last hold, and the watch shows your longest hold. In a Flow drill there's nothing to tap, and you rate the set on your phone. With variations, the watch shows the one you're on and taps your wrist when the next starts. In a Time trial with a rest after each lap, the watch shows Rest and counts down to the next one.

In a Reaction drill, the watch taps your wrist at each call and shows the word (with a dot in its colour, when it's a colour), so you feel the call even when the music is loud. Keep UmbraX Pro open on the watch.

Your phone does the timing, so keep it near you. If the watch says Phone not connected or "Couldn't reach your phone", bring them closer, open UmbraX Pro on your phone and try again.

Watch tests and fitness tests

On the phone, these tests are in the Speed and Endurance categories. Add a test to My drills on your phone first. Top Speed Run and Cooper Run then show under Tests on the watch: do them outdoors, away from tall buildings and trees, so the watch gets GPS. Cooper Run · Manual and the Twenty Minute Test run from your phone.

  • Top Speed Run: 10 seconds, flat out. The watch's GPS finds your top speed. Wait for Finding GPS… to finish, then tap Start. After 3, 2, 1, the watch buzzes: sprint.
  • Cooper Run on your smartwatch: run as far as you can in 12 minutes. The watch measures the distance with GPS and gives your estimated VO₂max.
  • Cooper Run · Manual: the same 12-minute run on a track, timed on your phone. Tap a lap each time you pass the start, then say how far into the last lap you got.
  • Twenty Minute Test: up to 20 sprints of 91 m (100 yards) between two cones, one each minute, with a jog back in between. Tap LAP as you cross the far cone (double tap on the watch, or carry your phone: hold it firmly and keep your eyes ahead). A sprint with no tap isn't counted. The target gets a second faster each level after level 10. The test ends at the first sprint you miss, and your score is the last level you made. It runs from the phone; the watch shows each level.

The watch keeps your result until it can reach your phone, so you don't need your phone with you for the GPS tests. The result shows on the test's page next time they connect.

These tests are hard. Warm up first and read the safety note before each one, and see Safety tips in the Terms. In child mode, the app asks for An adult is with me before each test, and for anyone under 16 a parent or guardian decides whether they do the Twenty Minute Test (see "Children and parents").

Your progress

Open a drill's report from Report (touch and hold the drill in My drills), or the chart button on the drill's screen.

  • Choose Day, Week or Month at the top. Everything on the report follows it.
  • The top card shows your latest result and whether you're Improving, Steady or Dipping, over your last 10 training days, weeks or months.
  • At a glance shows your load this week and, with Pro and your smartwatch, your fitness on this drill (not for Hold or Flow), your recovery and how hard you worked. Fitness and recovery show their trend.
  • On every chart, up is better: lap times are drawn upside down, so faster is higher. The dashed line shows the direction.
  • With variations, the top card shows their average, and each chart has a line for each one in its own colour. Tap a name to hide or show it. Heart rate, effort and load are for whole sets.
  • The set list shows your newest 10 sets; tap Show all for the rest. To change a set, tap it, or tap its menu and Edit set: you can change your own parts of it (How hard was it?, Technique or Ball control, a Flow drill's rating, the reps you entered when you didn't tap them, and the Note), then tap Save. The times, heart rate and GPS stay as measured, so your bests and trends stay true. To delete a set, tap its menu and Delete set.

To learn what each number means, see "What do the numbers mean?".

What do the numbers mean?

UmbraX Pro reads every set in five ways. You don't need to do anything extra: the numbers come from your taps, your smartwatch and the How hard was it? you tap after the set. Compare each drill only with itself.

Performance: what you did

Your main number for the drill.

  • A Route drill scored by laps: your lap time and speed. Example: a 20 m (66 ft) route in 8.0 seconds is 9.0 km/h (5.6 mph).
  • A Reaction drill: your rep time and speed. Example: a cone 4 m (13 ft) from home is 8 m (26 ft) there and back. In 3.2 seconds, that's 9.0 km/h (5.6 mph).
  • An Area drill, or a drill with no layout, scored by reps: your reps a minute: your reps over your working time, so a short set and a long one compare. Example: 12 push-ups in a 60-second set is 12 a minute; 5 in a 20-second set is 15 a minute. In an interval set, it comes from how fast each rep was.
  • A Hold drill: the seconds held. Each set shows your longest hold, and the report charts it. With variations, the report's top card averages them instead. Example: a Plank set of 45 seconds Front, 38 Left side and 40 Right side has a longest hold of 45; the report's top card shows their average, 41.
  • A Flow drill: your own rating of how clean it was, 1 to 5.

Faster laps, more speed, more reps a minute, a longer hold or a higher rating is better.

Intensity: how hard your heart worked

Your average heart rate in the set, as a share of your estimated maximum. In an interval set, only the work rounds count (and the few seconds after each, when your heart rate peaks), so walking back between sprints doesn't make a hard set look easy. The app estimates your maximum from your birth year: 208 − 0.7 × your age.

ZoneShare of your maximumWhat it feels like
1 EasyUnder 60%Warming up, walking back
2 Moderate60 to 70%A steady jog, you can talk
3 Hard70 to 80%Breathing hard, short sentences
4 Very hard80 to 90%A few words at a time
5 Max90% and overAll out, for seconds only

Example: you're 30, so your estimated maximum is 187 bpm. A set at an average of 165 bpm is 88% of it: zone 4, Very hard.

Zones need your watch and show from age 13. The maximum is an estimate: yours can be 10 bpm or more higher or lower. The formula was worked out from adults, so for teens it's a rougher guide.

Load: how much you did

How hard it felt (the 1 to 10 you tap after the set) times the minutes of work. Rest between rounds doesn't count.

Example: 8 hill sprints of 15 seconds each, with a walk back down between them. You tap 9 for how hard it was: that's 2 minutes of work × 9, a load of 18.

Load isn't better or worse. It shows how much you did. A big week followed by a lighter one is normal.

Fitness on this drill: are you getting fitter?

Your work for each heartbeat. For a Route drill or a Reaction drill, the work is your speed. For an Area drill or a drill with no layout, it's your reps a minute (in an interval set, from how fast each rep was). The same work with a lower heart rate, or more work with the same heart rate, makes the number go up.

  • Zig-zag cuts: in week 1 you run 9.0 km/h at 165 bpm: fitness 15.2. In week 5 you run the same speed at 150 bpm: fitness 16.7. Same speed, and your heart worked less: a sign you're getting fitter on this drill.
  • Push-ups: 10 reps in a minute at 150 bpm is 66.7. Four weeks later, 12 reps at 150 bpm is 80.0.
  • Hill sprints (a drill of your own): tap REP at the top of each sprint. Faster sprints at the same heart rate raise the number.

It needs your watch and a set of 30 seconds or more, because your heart rate takes a while to catch up. From age 13, there's no number when your heart rate stays under half your maximum: the set was too easy to read. It only compares sets of the same kind (time trial, fixed time or intervals). A 15 on zig-zag cuts and an 80 on push-ups can't be compared with each other. Hold and Flow drills don't have this number.

Recovery: how fast you bounce back

How far your heart rate falls in the minute after the set. After Stop, stay still for a minute, and the app adds it to the set.

Example: 172 bpm when you stop and 144 bpm a minute later is a recovery of −28. A bigger drop usually goes with better fitness. Compare it with your own past sets.

Tests: your fitness level

The watch tests and fitness tests measure you, not a drill. Do the same test the same way every 6 to 8 weeks.

  • Top Speed Run: your top speed in km/h (mph).
  • Cooper Run: your distance in 12 minutes, and an estimated VO₂max (how much oxygen your body can use): (distance in metres − 504.9) ÷ 44.73. Example: 2,800 m (1.74 miles) gives an estimated VO₂max of 51.3.
  • Twenty Minute Test: the last level you made, out of 20.

Improving, Steady or Dipping

The report draws a straight line through your last 10 training days, weeks or months (whichever you chose at the top) and checks how far it moves from start to end.

  • Up more than 2%: Improving.
  • Down more than 2%: Dipping.
  • In between: Steady.

One good or bad day hardly moves it. Example: your speed on zig-zag cuts went from about 6.9 to 7.2 km/h (4.3 to 4.5 mph) over your last 10 training days, so the report shows Improving +4%. Dipping after a hard week is normal: rest well and go again.

Where the formulas come from

The formulas behind the numbers come from published sports science studies:

  • Estimated maximum heart rate (208 − 0.7 × age): Tanaka, Monahan and Seals, "Age-predicted maximal heart rate revisited", Journal of the American College of Cardiology, 2001. It pooled 351 studies of about 18,700 people. Later studies found almost the same: Gellish and others, Medicine & Science in Sports & Exercise, 2007 (207 − 0.7 × age), and Nes and others, the HUNT Fitness Study, Scandinavian Journal of Medicine & Science in Sports, 2013 (211 − 0.64 × age). Read the Tanaka study on PubMed.
  • Estimated VO₂max from the Cooper Run: Cooper, "A means of assessing maximal oxygen intake", JAMA, 1968, a study of 115 men in the US Air Force. The app uses the formula commonly used with his test. Read it on JAMA.
  • Load (how hard it felt × minutes): the session rating of perceived exertion, from Foster and others, "A new approach to monitoring exercise training", Journal of Strength and Conditioning Research, 2001. Foster counts the whole session; UmbraX Pro counts only the minutes of work, so its numbers are lower. Read a review of the method.
  • Zones use five steps of 10% of your maximum, as many sports watches do. Fitness on this drill, recovery and Improving, Steady or Dipping are UmbraX Pro's own ways of reading your sets, worked out as this page explains.

The studies are listed so you can read them. Their authors and journals haven't reviewed UmbraX Pro and don't endorse it.

These numbers are estimates

Speed, distance, heart rate, your maximum, zones, load, fitness on this drill, recovery, estimated VO₂max, and the trends and labels are estimates for your own training. A formula gives the average for people of your age; your own maximum can be 10 bpm or more off. Your watch and phone can be off too. Improving, Steady and Dipping only show how your numbers moved. They don't tell you anything about your health, and Improving doesn't mean you're ready to train harder. If your numbers dip for no clear reason, or you feel unwell, rest, and see a doctor if it goes on. If you have a health condition, talk to a doctor before you train hard. See section 6 of the Terms of Use.

Free, Pro and Pro Family

UmbraX Pro is free to use. Timing sets, the smartwatch app and backup are free.

Free has 3 drills, made by you or shared with you (built-in drills and variations don't count; a copy made with Clone does; past 3, your first 3 open and the others are kept and open with Pro), 3 variations a drill, its own included, the last 30 days of your sets, and only the last Top Speed Run and Cooper Run result, so write down your first results to compare.

Pro adds unlimited drills, up to 12 variations a drill, your full history, trends for Top Speed Run and the Cooper test, and fitness, intensity and recovery trends. Pro Family gives the same to everyone in your Apple Family Sharing group. Both come monthly or yearly, with a free trial.

  • Get Pro: Profile > Upgrade to Pro.
  • Have a code? Profile > Redeem code. Apple checks it and shows what you get before anything starts.
  • New phone or reinstalled the app: Profile > Restore purchases, signed in to the same Apple Account.
  • Cancel or change plan: Profile > Manage subscription, or your phone's Settings > your name > Subscriptions. Deleting the app doesn't cancel.

On a child's phone, these buttons aren't shown. A parent or guardian taps Plan in Profile, then For parents or guardians (see "Children and parents").

Nothing is deleted on Free. Past 3 drills, such as after Pro ends, your first 3 still open and the others stay, marked Opens with Pro. Older sets are kept and show again with Pro. To remove them, tap Delete older sets (Delete older runs for a test) in the drill's report. The full details are in section 8 of the Terms of Use.

Backup and a new phone

iCloud: if iCloud Drive is on, the app keeps a copy of your drills, drafts, sets, your week, your guides (web links, and links to your videos; the videos stay in Photos), your categories (with their photos) and profile in your iCloud Drive, in a folder called UmbraX Pro. Check it in Profile > Backup, and tap Back up now if you want. If it says your drills are only on this phone, tap Open Settings and turn on iCloud Drive.

On a new phone signed in to the same Apple Account, install UmbraX Pro: your drills come back from iCloud by themselves. If iCloud is still downloading, they come back the next time you open the app, and drills and sets you add meanwhile are kept too. Wait until Profile > Backup says Saved to iCloud before you plan your week, add a guide to a move, make a category or save a drill someone sent you: if you do any of these first, it can replace your old week, guides or categories in iCloud. With more than one phone or tablet on the same Apple Account, drills and sets you add on one appear on the others.

Backup file: Profile > Save a backup file saves everything, including heart rate and watch test results, to a file you choose where to keep. Keep it somewhere private. To bring it back, use Restore from a backup file: it replaces the drills, drafts, sets, your week, your guides and your categories on the phone.

Some things are never backed up: your birth year and your agreement to the Terms (the app asks again on a new install), and, in iCloud, heart rate and the speed and distance your watch measures (they're in backup files only).

To delete a drill, open its category and touch and hold it, then Delete. If iCloud Drive is on, the app keeps one copy of what you had just before your latest delete, in a Previous folder inside the UmbraX Pro folder in iCloud Drive, for up to 30 days. The next delete replaces that copy, so it isn't a history of everything you've deleted. To delete everything, delete the app, and the UmbraX Pro folder in iCloud Drive (in the Files app). More in the Privacy Policy and Health data privacy.

Children and parents

Under 13, the app is in child mode. The app knows only your birth year, so child mode stays on until the January after you turn 13. Anything this Help says is for 13 and over starts then. In child mode:

  • the first safety note asks them to train with an adult nearby, unless a parent or guardian has said they can train on their own;
  • Start here has two drills, with no Top Speed Run;
  • the child's name isn't put on drills they make;
  • there are no prices, offers or buy buttons, and no email links;
  • there's no Add a link or Edit link in My guides (links already on a drill still show and open);
  • before every set of an All-out drill and before every test, the app asks for An adult is with me.

To see the plans on a child's phone, or to restore a purchase or redeem a code, a parent opens Profile, taps Plan, then For parents or guardians, and enters their own year of birth. A purchase on a child's own Apple Account goes through Apple's Ask to Buy when it's on, and a child can get Pro when the family shares Pro Family.

Your child's daily guide, the sets and minutes a day for their age group, is in Profile > Daily guide. It's a guide, not a rule, so please keep an eye on how much your child does. The Twenty Minute Test can last 20 minutes, longer than the guide for under 16s, so for anyone under 16 a parent or guardian decides whether they do it. To change the age, change Birth year in Profile; if that changes who should agree to the Terms, the app asks again. More in the Privacy Policy and section 3 of the Terms of Use.

Sharing drills

If someone sends you an UmbraX Pro drill as a QR code, link or file, open it on your phone. The app shows the drill, who made it and how to do it. Tap Save to my drills (Replace my copy if you have it already). If its category isn't one you have, it goes in a category called Shared, which you can change like a category of your own (see "Make a category of your own"). On the free plan, a drill shared with you is one of your 3 drills: past 3, it's kept and opens with Pro.

Sending your own drills to other people is a Preview for now (see "What's next").

Safety

Sport and exercise can cause injury. Before you train:

  • check your health first, and talk to a doctor if you're not sure hard exercise is right for you;
  • choose open, flat, dry ground away from roads, with room to slow down, and use soft, low markers;
  • warm up, and stop if anything hurts or you feel unwell;
  • after any knock to the head, stop for the day, and don't train again until a doctor or other health care provider says you can.

Read the full Safety tips in Profile, or section 6 of the Terms of Use.

If someone is hurt during a drill, get help for them first. Then tell us (see "Contact us").

What's next

Things marked Preview in the app are features we are building: Elite drills (advanced drills, each with a video), talking a drill through instead of typing it, sending drills to other people, more sports, and plans for coaches and clubs. You can't use them yet, and they aren't part of the free plan or Pro.

Tap one to see what it will do. If you're 13 or over, tap I want this to tell us by email; it helps us decide what comes first.

We're also working on the drill marketplace, and on what the coach and club plans will do (see "What UmbraX Pro does"). The marketplace isn't in the app yet, not even as a Preview, and it isn't the same as Elite drills, the drills marked Preview under Elite at the end of Speed with ball.

Troubleshooting

Measuring jumps or loses tracking

Move the phone slowly, keep the camera on the ground, and measure in daylight on ground with some texture. Plain shiny floors and dark evenings are hard. If tracking is lost, aim at the last object and set it again.

It says "Camera is off for UmbraX Pro"

Tap Open Settings and turn on Camera for UmbraX Pro. Or do without it: type the layout in when you make a drill, and set the cones out with a tape measure from the lengths and turns on the drill's page.

The ground isn't found, and Set stays grey

Your phone has to find the ground first. Follow the guide on screen: aim at the ground about 2 m (7 ft) ahead and move the phone slowly from side to side. Phones without a LiDAR scanner take longer, and on plain grass or in low light it can take 10 seconds or more. If it still isn't found, try ground with more texture or better light.

The markers don't line up when I set up

Stand exactly where A goes when you tap Set A, and keep the phone pointed at the ground as you walk. If it says "Tracking was lost", aim at where A goes, tap Set A and set the direction again. If they drift, tap Done, then Set it up on the field to start again.

My watch shows no drills

Open UmbraX Pro on your phone and make sure you've agreed to the Terms. Add or make a drill: the watch shows the drills in My drills. Keep the watch and phone close, with Bluetooth on.

No heart rate after a set

Heart rate comes from your smartwatch, so start the set with UmbraX Pro open on the watch. Check that Health access is on for UmbraX Pro (see "Your phone and smartwatch").

The watch says "Finding GPS…" or "Not enough GPS"

Go outdoors, away from tall buildings and trees, and wait until it's ready. If it says to allow location, turn on Location for UmbraX Pro (see "Your phone and smartwatch").

Voice laps doesn't hear me

Allow the microphone and speech recognition for UmbraX Pro in Settings, keep the phone near you or wear AirPods, and use Test before the set. In wind or a noisy place, tap instead. It listens for the English words "lap", "count" and "stop". If Voice laps is grey and says this phone doesn't have speech recognition on the phone itself, tap instead.

I can't hear the calls

Turn the volume up with the volume buttons, and turn your music down in its own app: the calls play over it but don't lower it. Keep UmbraX Pro open on your phone's screen, as the calls stop if you go to another app or lock the phone. With AirPods in, the calls play in them. Wear your smartwatch with UmbraX Pro open, and it taps your wrist at each call.

I can't add or remove a variation

Variations are locked once a drill has a set: you can still rename, change and reorder them, but to add or remove one, clone the drill (see "Change a drill"). On the free plan, past 3 variations, Add on the instruction and Add a variation on the drill's page show a lock (see "Free, Pro and Pro Family"); a drill with more, from when you had Pro or shared with you, keeps them and still runs. A Reaction drill and a built-in drill can't have variations of your own; make your own drill with Create a drill instead (see "How drills work").

I can't edit my drill

Edit is only for your own drills, and only until their first set. After that, you can still change each object's distance, turn and type: open the drill and tap Distances and turns, then Change distances and objects. For anything else, touch and hold the drill in its category, tap Clone and edit the copy (see "Change a drill"). Built-in drills can't be edited.

I can't choose the score I want

The scores you can pick depend on what you do: a Route drill can be Laps or Flow, a Reaction drill Reps, an Area drill Reps or Flow, and a drill with no layout Reps, Hold or Flow. A hold, such as a plank, needs No layout. To change a saved drill's score, use Edit before its first set; after it, Clone the drill and edit the copy (see "Change a drill").

There's no fitness number for my plank

Fitness on this drill divides your speed or reps by your heart rate, so a Hold or Flow drill doesn't have it. With your smartwatch, it still shows your heart rate and recovery, and from 13 your zone. A Flow set's score is your rating: if you didn't rate it on the result, that set isn't charted.

I can't delete my category

Delete category stays grey until the category has no drills, and says how many are left. Every drill under Yours counts, including ones you took out of My drills. Move each one with Edit (pick another Category), which works until its first set, or touch and hold it and tap Delete (see "Make a category of your own").

I can't make another drill

You've reached the free plan's 3 drills, counting drills shared with you and copies made with Clone (see "Free, Pro and Pro Family"). To make room, delete one in its category (see "Backup and a new phone").

My drill says Opens with Pro

On the free plan your first 3 drills open, in the order they reached your phone. The others are kept, not deleted, and open with Pro. Or delete one of your first 3 in its category, and the next one opens.

Pro isn't showing

Tap Profile > Restore purchases, signed in to the Apple Account that bought Pro. If it says it couldn't reach the App Store, or the Pro screen says Pro can't be bought right now, check your connection and try again. With Pro Family, check that the family organiser shares it with you. On a child's phone, a parent or guardian restores it from Plan in Profile, then For parents or guardians (see "Children and parents").

My drills are gone after reinstalling

If iCloud Drive was on, they come back by themselves: keep the app open for a moment while it checks. Otherwise, use Restore from a backup file if you saved one. Heart rate and your watch test results (speed and distance) aren't in iCloud, so they come back only from a backup file.

My video says "Not in Photos"

The app can't see it, or it was deleted from Photos. Check these before you tap Remove, which takes the link off the drill:

  • Photos is off for UmbraX Pro. After you install the app again, or on a new phone, you have to allow it again. Tap Add guide (or touch and hold a video, then Replace), then Choose from Photos, and allow Photos when asked; you can close the picker without choosing (or, if UmbraX Pro is listed there, choose Full Access in Settings > Apps > UmbraX Pro > Photos), then open the drill again.
  • Limited access. The app sees only the videos you allowed: choose Full Access there, or add the video to the ones you allow.
  • A new phone. The video comes back only if iCloud Photos is on, on your old phone and the new one, with the same Apple Account.

If it was deleted from Photos, touch and hold it and Replace or Remove it.

My guides didn't come back on my new phone

Your guides (web links, and the links to your videos) come back with your drills from iCloud Drive, and the videos themselves from iCloud Photos. If a video shows Not in Photos, see the entry above. If your guides are gone from the drill, you may have added a guide on the new phone before your drills came back, which replaces the guides from your old phone. Your videos are still in Photos: tap Add guide, then Choose from Photos, to add them again, and add web links again with Add a link. If you saved a backup file, Restore from a backup file brings your guides back, but it also replaces your drills, sets, week and categories with the file's.

I can't record, keep or choose a video

  • "Allow the camera in Settings to record a video": turn on Camera in Settings > Apps > UmbraX Pro. Or film with the Camera app and use Choose from Photos.
  • "Photos is off for UmbraX Pro", or "Allow Photos for UmbraX Pro in Settings to keep videos": your videos are kept in Photos, so the app needs to see them. In Settings > Apps > UmbraX Pro > Photos, choose Full Access.
  • "Allow this video": with Limited access, tap Allow video and select the video again.
  • No Add guide: the card says 6 of 6: a variation has 6 guides already, videos and links together. Touch and hold one to replace or edit it, or remove one first.
  • No sound: turn on Microphone in Settings > Apps > UmbraX Pro.

A link won't open

Links open in Safari, so you need the internet. If the page has moved or gone, touch and hold the link and tap Edit link to fix the address, or Remove it.

I tapped wrong, or need to fix a set

In a reps set of Intervals or Fixed time, you can put the reps right on the result, before you start the next set or leave the drill, and in Intervals (or Fixed time with several variations) also in the rest after each round (see "Run a set"). Lap taps, reps in a Time trial and a Reaction drill's reps can't be changed.

Later, open the drill's report and tap the set to change your own parts of it, or tap its menu and Delete set (see "Your progress").

Something else isn't working

Tell us (see "Contact us"), with what happened and on which screen.

UmbraX Teams: getting started

UmbraX Pro and UmbraX Teams

The app has two modes.

  • UmbraX Pro is you on your own. You make drills or add ours, set them up anywhere with your phone, run timed sets and see your progress. It needs no account, and nothing about your training is sent to us.
  • UmbraX Teams is you with your team. You see your team's schedule, the match plan and the drills your coach shares. It needs an account.

Pick a mode the first time

The first time you open the app, it asks How will you train? Tap Start with Pro or Sign in to Teams. You can switch any time.

Switch between Pro and Teams

  • Tap the logo at the top left of the home screen. The app asks Switch mode. Tap Switch to UmbraX Teams or Switch to UmbraX Pro.
  • Or open Profile and use the Mode row: Pro or Teams.

Switching doesn't sign you out. Teams keeps its own drills, sets and week with your account. Your Pro drills stay in Pro, on your phone.

Whose phone is this?

Before you sign in to Teams, the app asks Whose phone is this?

Mine

Tap Mine if you're 13 or over: a player, a coach, or a parent following your teen's team. If the phone doesn't know your year of birth yet, it asks What year were you born? first. Then you sign in with your own account.

If you're under 13, you can't sign in yourself. The screen says "Under 13? Ask a parent or guardian to set up this phone for you."

My child's

A parent or guardian taps My child's to set up a child's phone. The app asks What year was your child born?

  • Your child is under 13. Tick "I'm this child's parent or guardian, and I'm setting up this phone for them." Then sign in with your own account, under Sign in as the parent or guardian. The phone then shows your child's teams.
  • Your child is 13 or over. The app says Hand the phone to your teen. Tap They'll sign in now, and your teen signs in with their own account. On your own phone, choose Mine and sign in as yourself.

What a child's phone can't do

A phone set up for a child under 13 shows the child's teams, with a parent's account signed in. On that phone:

  • There is no Ask.
  • Attendance can be read but not changed: "Ask your parent to change it."
  • The roster shows names only, with no emails or phone numbers.
  • There is no Set up a club, no Contact support and no Delete Account.
  • Sign Out asks for the parent's year of birth first.

If the parent has more than one child under 13, Profile lets you pick which child the phone is for.

Sign in

Teams offers three ways to sign in:

  • Continue with Apple uses Sign in with Apple.
  • Continue with Google opens Google's sign-in page.
  • Continue with email opens Sign in with email: type your email and password and tap Sign in.

Create an account with your email

  1. Tap Continue with email, then Create an account.
  2. Type your email and a password of at least 12 characters. Tap Create account.
  3. Check your email: we send a 6-digit code. Type it in and tap Confirm. Send a new code sends another.

Forgot your password?

On Sign in with email, tap Forgot password? and then Send code. We email you a code. Type the code and a new password, and tap Set password.

After you sign in

Your name, sport and units come to the phone from your account. If nobody has agreed to the Terms on this phone yet, the app asks next (see Terms of Use). If you're under 18, a parent or guardian agrees for you. The phone also asks if it may send you notifications.

Sign out

Open Profile and tap Sign Out. The app asks Sign out? first. Your Teams drills, sets and week go from this phone and stay in your account. Heart rate and watch tests stay on this phone.

After you sign out, the phone stays in UmbraX Teams, signed out, with Sign In and Switch to UmbraX Pro. Pro's drills and sets on the phone are untouched.

If some changes haven't reached your account yet, the question says so. They stay on the phone and go up when you sign in again.

Delete your account

Open Profile and tap Delete Account. The app asks Delete your account? and lists what will happen:

  • For each club you own: that it will pass to an admin, or that it will be deleted. See "What happens to my club if I delete my account?".
  • For each child you're the only parent of: that the child will be deleted and taken off every team.
  • "This deletes your account and its profile, and your Teams drills, sets and week, in your account and on this phone, with their heart rate and watch tests."
  • "Pro's drills, sets and iCloud backup on this phone stay. It can't be undone."

Tap Delete Account to go ahead, or Cancel. For everything that is deleted and when, see the Privacy Policy.

The Team tab

Teams has two tabs at the bottom: Team and Individual. Team opens first.

Pick your team

Your team is at the top, with its club and your role. If you're on more than one team, tap it to switch. Teams you coach or help run are under Your teams, and teams you play on or follow as a parent are under Teams you follow.

A team you asked to join before invites replaced requests may still say Waiting for the coach or Waiting for your parent or guardian. The team's cards show once you're approved.

The buttons under your team

Which ones you see depends on who you are on the team.

  • Ask answers quick questions about your team. See "Ask a question about your team".
  • Roster shows who is on the team. See "Your team's roster".
  • People is for the team's coach and coach assistants and the club's owner and admins. See "Your team's people on your phone".
  • Club is for the club's owner and admins. See "Change the club's details".

The cards, from the top

  • Family requests shows when someone asked to be linked to a player through a family link. See "Family link".
  • Schedule is your team's calendar. Pick a day to see its sessions, or tap See all for the whole list.
  • Attendance is for the day you picked: who is coming, and your own answer.
  • Videos shows the videos your coach put on that day's sessions.
  • Match plan shows on a match day: Plan PDF and Coach's notes once the coach has shared a plan, and "No plan yet." until then.
  • Drills for the day shows the drills your coach put on the next session. Staff also see Team collections there. See "See and set up your team's drills on your phone".
  • A team can choose not to share its match plans or drills with players, or with parents. Then those cards don't show for you. Ask your coach.

Pull down to read everything again. With no internet, the tab shows your teams as last saved.

No team yet?

With no team, the tab shows Ask your coach: "Your coach adds you to the team. Once they do, your team shows here." Your coach sends an invite by email. Open it and confirm, and the team appears. See "Invite people to your team".

Above it, the tab offers Set up a club, for a coach or a club. If you already have a club with no team, it shows Open your club instead. See "Set up a club".

Leave a team

You can't take yourself off a team. Ask your coach: the coach, the club's owner or an admin takes a player off. A parent or guardian asks the coach for a child. While a request is still waiting, you can cancel it yourself in the web app, with Cancel request on your dashboard.

The Individual tab

Individual is your own training inside Teams: your drills, your week and your progress, as in UmbraX Pro. They're kept with your account, apart from the drills you made in Pro mode.

Nothing is for sale in Teams. There are no plans to buy and no prices. When your club's plan gives your team the full player app, or you already have Pro on this phone, everything in Pro is open here. Profile then shows "Pro from" and your club's name under Plan. See "Club billing".

Heart rate and watch test results never leave your phone.

Ask a question about your team

Ask answers short questions about your team's training, matches and drills.

Who has Ask

  • Players 13 or over who are on the team, and the team's staff, have Ask.
  • A parent following a child's team doesn't. Neither does a child's phone.
  • UmbraX Pro has no Ask.

Tap a question

Open Ask. It says "Tap a question, or type your own." The questions above the box answer at once from what your phone already has, so they work with no internet:

  • Next training
  • Next match
  • This week
  • Today's drills

Staff also get No score yet and Who's coming.

Under an answer, tap a link to open the session, plan, drill or video it came from.

Type your own question

Type in the box ("Ask about training, matches or drills") and tap Send. A question can be up to 300 characters. A typed question needs the internet. The answer is one or two sentences, from your team's schedule, plans, drills and videos. An answer can be wrong. If it matters, check the schedule or ask your coach.

Clear empties the list. Your phone keeps the last 20 questions and answers for each team, and removes them when you sign out.

What Ask won't do

  • Injuries and feeling unwell. If your question is about being hurt or unwell, Ask doesn't try to answer. It says "Tell your coach or a parent. If it's an emergency, call 911."
  • Many questions in one day. After many typed questions in a day, Ask says "You've asked a lot today. The chips still work." and when it will be back. The questions you tap keep working.
  • Things it doesn't know. Ask only uses what your team has shared with you. It can't see other teams.

Who sees what I ask

Nobody at your club. Your coach and club never see your questions. The last 20 stay on your phone until you tap Clear or sign out. For how your data is handled, see the Privacy Policy.

Your dashboard in the web app

Sign in to the web app with the same account to see your Overview. It shows only what applies to you:

  • Coming up: the next 3 sessions across your teams, with See the schedule.
  • Teams you follow: each team, with Following or Waiting for the coach, and links to its Schedule, Roster and Documents. Cancel request shows while you wait.
  • Your players, for a parent or guardian: each child and their teams. See "Invite people to your team" and "Family link".
  • Parents and guardians, for a player 13 to 17: add a parent or guardian by email, so they see the teams you follow.

The dashboard also has Account, Notifications and Support tabs.

What stays in UmbraX Pro

UmbraX Pro mode needs no account. Your drills, sets and progress there stay on your phone, and in your own iCloud backup if you turn it on. Nothing in Pro is sent to us, to a coach or to a club. Signing in to Teams, signing out and deleting your account don't change what's in Pro.

UmbraX Teams on the phone: if something goes wrong

  • I don't see Teams anywhere. Teams isn't in every version of the app. If there is no Mode row in Profile, your version has UmbraX Pro only.
  • "Wrong email or password." Check both. If you signed up with Apple or Google, use that button, not your email. Forgot password? sets a new one.
  • "There's already an account with this email. Sign in instead." Go back and sign in. Use Forgot password? if you don't remember it.
  • "That code isn't right. Check the email and try again." or "That code has expired. Send a new one." Tap Send a new code and use the newest email.
  • "Too many tries. Wait a few minutes." Wait, then try again.
  • "You're offline. Try again when you have signal." Signing in needs the internet.
  • "Couldn't sign in with Apple. Check you're signed in to your Apple Account in Settings, then try again." Open your phone's Settings, check your Apple Account, and tap Try Again.
  • "Under 13? Ask a parent or guardian to set up this phone for you." A parent or guardian taps My child's and signs in with their own account.
  • "You're signed out" The phone stays in Teams. Tap Sign In, or Switch to UmbraX Pro.
  • My team says "Waiting for the coach". The coach hasn't approved you yet. Ask them.
  • My team says "Waiting for your parent or guardian". Your parent or guardian needs to confirm first. Ask them to check their email.
  • "Showing your teams as last saved." The phone couldn't reach UmbraX Pro. Check your internet and pull down to try again.
  • "Ask needs the internet. The chips work offline." Your typed question stays in the box. Connect and tap Send again.
  • "Ask can't answer right now. Try again." Wait a moment and send it again.
  • "That isn't there any more." The session, plan, drill or video an answer linked to was removed.
  • "Offline. Saved on this phone." in Profile. Your Teams drills and sets are on the phone and go to your account when you're back online. Sync Now tries again.
  • "Too many requests. Wait a minute and try again." The app was asked for a lot in a short time. Wait a minute.
  • Still stuck? If you're 13 or over, use Contact support in Profile (see "Contact support"). If you're under 13, ask a parent or guardian.

UmbraX Teams: clubs and teams

Set up a club

A club in UmbraX Teams holds your teams, your seasons and your staff. You can set one up in the web app or on your phone. You need an account, your name on it, and to be 18 or over.

Set up a club in the web app

  1. Sign in and open your dashboard. Choose Set up a club.
  2. If your account has no name or year of birth yet, the page asks for them first, under Add your name first. Fill them in and choose Save and continue.
  3. Pick Start a club ("For a club or academy with several teams and staff. You are the owner.") or I coach on my own ("For one coach with their own teams. No club name, no other staff.").
  4. Fill in the details: Club name (not asked when you coach on your own), Main sport, Units, Club colours and, if you like, a Crest. How it looks shows the club as others will see it.
  5. Choose Create. By creating a club you agree to the Terms (see Terms of Use).

You land on the club's Teams page, ready to add the first team.

Good to know:

  • A coach on their own is shown as "Coach" and their name, with "(independent)" after it. That club has no admins and can't be handed to someone else.
  • You can coach on your own once, and you can own up to 5 clubs.
  • If your club has no plan yet, a line at the top says so and links to Billing. See "Club billing".

Set up a club on your phone

  1. In UmbraX Teams, open the Team tab. With no team yet, you see a Set up a club card. Tap Set up a club.
  2. Pick Set up a club or Coach on your own.
  3. Fill in Club name (for a club), Main sport, Units and the two colours. The preview shows how the club looks.
  4. Tap Create club.
  5. On Your first team, give the team a name, a sport and an age group and tap Create team. Or tap Do this later.

If you have a club with no team yet, the Team tab shows your club's name with Open your club. A child's phone never shows these cards.

Change the club's details

Only the club's owner and admins can change the club.

  • In the web app: open the club and choose Settings. Change the name, main sport, units or colours and choose Save changes.
  • On your phone: on the Team tab, pick one of the club's teams and tap Club. Change Club details and tap Save details.

Add or change the crest

The crest is set in the web app, in Settings (or while you set up the club). Choose a picture under Crest. Any picture works: the web app makes it small enough before it saves. Until you add one, the club's initials stand in. Remove the club's crest takes it away again.

Set the club's time zone

In the web app, Settings has Time zone. Sessions are entered in the club's time zone. How the times then show on each device is in "Times in another time zone". Pick the Club time zone and choose Save time zone. With Not set, sessions show as entered on every device.

Add and archive seasons

A season groups teams and has a first and a last day. Seasons are optional.

Add a season

  1. In the web app: open the club's Teams page and choose Add a season. On your phone: tap Club, then Add a season.
  2. Give it a name and its first and last day. A season has to end after it starts.
  3. Under Teams in this season, every team that isn't archived is ticked: "Every team moves into this season. Untick any that stay where they are." Each team shows where it is now ("Now in" and the season's name). Untick all and Tick all change them all at once.
  4. Choose Add season.

The teams you left ticked move into the new season together. If two of them have the same name, nothing moves and the page says "Two of those teams have the same name, so they can't share a season."

Archive or restore a season

When a season's last day has passed, the web app asks "This season has ended. Archive it?" with Archive season. Archiving a season archives the teams in it. To bring a season back, choose Show archived, then Restore season. The teams that were archived with it come back too. On your phone, each season on the club's page has Archive or Restore.

Add and change teams

Add a team

  1. In the web app: on the club's Teams page, choose Add a team. On your phone: tap Club, then Add a team.
  2. Fill in Team name, Sport, Age group (or No age group) and Season (or No season).
  3. In the web app, the form also has Size and Level. They set what the team costs. See "Club billing".
  4. Choose Add team.

A club can have up to 100 teams. Two teams in the same season can't share a name.

Rename, archive or restore a team

  • In the web app: on the Teams page, open the menu at the end of the team's row. Rename changes its name. Archive puts it away. To see archived teams, choose Show archived, then Restore in the team's menu.
  • On your phone: tap Club, then the menu beside the team. Edit changes its name, sport, age group and season. Archive puts it away, and archived teams are listed under Archived with Restore.

The owner and admins add, archive and restore teams. A coach can rename their own team in the web app. An archived team keeps its players, sessions and plans, but nothing on it can be changed until it is restored. While it is archived, only its staff can see it. Players and parents can't. A team in an archived season needs the season restored first ("Restore the season first.").

A team's page

In the web app, choose a team's name to open its page. From there you reach its Schedule, Roster and Documents, and its players and requests. Adding players is in "Invite people to your team".

Who can do what in a club?

A club has two club-wide roles, Owner and Admin, and three team roles, Coach, Coach assistant and Team manager. A person can have a different role on each team. Staff are 18 or over.

What you can doOwnerAdminCoachCoach assistantTeam manager
See the club, its staff and its teamsYesYesTheir own teamsTheir own teamsTheir own teams
Change the club, its seasons, teams and crestYesYesNoNoNo
Invite staff, change roles and remove staffYesYes, but not the ownerNoNoNo
Transfer ownership or delete the clubYesNoNoNoNo
Open BillingYesYesNoNoNo
Rename the teamYesYesTheir own teamNoNo
Invite players, and approve, decline or remove themYesYesYesNo, but can see themNo
Make and change match plansYesYesYesYesNo
Share or delete a match plan, and change drills and playbooksYesYesYesNo, but can read themNo
Add and change sessionsYesYesYesNoYes
Give a match's scoreYesYesYesYesYes
Take the register at a sessionYesYesYesYesYes
Answer for a playerYesYesYesNoYes
Add, change and remove team documentsYesYesYesNoYes

A coach on their own is the owner of their club. That club has no admins.

See the staff

In the web app, open the club and choose People. The owner and admins see each person's roles and teams. Coaches, coach assistants and team managers see names and roles only.

Invite staff

Only the owner and admins invite staff.

  1. In the web app: on People, choose Invite. On your phone: tap Club, then Invite staff on the Staff card.
  2. Type the email address.
  3. Pick the Role: Admin, Coach, Coach assistant or Team manager. A coach on their own has no Admin choice.
  4. For a coach, coach assistant or team manager, tick at least one team. An admin runs the whole club, so there are no teams to pick.
  5. Choose Send invite (on your phone, Send the invite).

The person gets an email with a link that works for 7 days. Until they accept, the invite sits under Pending invites (on your phone, Waiting on an answer) with Resend and Cancel. After 7 days it leaves the list. Send a new invite then. A club can send up to 20 invites an hour and have up to 50 waiting.

A coach can also invite a team manager for their own team. That is in "Invite people to your team".

Accept a staff invite

Staff invites are accepted in the web app.

  1. Open the link in the email. The page shows who invited you, the club, and your role and teams.
  2. Choose Sign in or sign up to accept.
  3. If you signed in with the email the invite was sent to, choose Accept.
  4. If you signed in with another email, choose Accept anyway. The page says the invite is for another address and shows Send a code to with that address. Choose it. A 6-digit code goes to that address and works for 15 minutes. Type it in and choose Accept. Send a new code sends another.

You need a name on your account and to be 18 or over. By accepting you agree to the Terms. Not you? Switch account signs you out so you can sign in as someone else.

Change someone's roles

In the web app, on People, choose Change role beside the person. Set Club admin to Admin of the whole club or Not an admin, and pick a role, or No role, for each team. Then choose Save roles. Everyone on the staff needs at least one role. To take someone out of the club, use Remove.

Only the owner can change the owner's own roles.

Remove someone, or leave a club

In the web app, on People:

  • Remove takes a person out of the club. The page asks first: they lose access to its teams.
  • Leave this club is on your own row. It asks "Leave this club? You lose access to its teams."

The owner can't be removed and can't leave. Transfer ownership first.

Transfer ownership

Only the owner of a club can do this, in the web app. A coach on their own can't hand over their club.

  1. Make the new owner an admin first, in People. Ownership can only go to an admin.
  2. Open Settings and find Transfer ownership.
  3. Under New owner, choose the admin, then Transfer ownership.
  4. The page asks you to confirm. Choose Yes, transfer.

You become an admin. You can't undo it yourself.

Delete a club

Only the owner can delete a club, in the web app.

  1. Open Settings and find Delete club.
  2. Type the club's name exactly, as the page asks.
  3. Choose Delete club.

"This deletes the club's seasons, teams, staff and pending invites. It cannot be undone." If the club pays for a plan, see "Club billing" first.

What happens to my club if I delete my account?

Before you delete your account, the app tells you what happens to each club you own:

  • If the club has an admin, it passes to the admin who has been one the longest: "You own" the club. "It will pass to" that admin.
  • If it has no admin, or you coach on your own: "You own" the club. "It will be deleted."

To choose the new owner yourself, transfer ownership before you delete your account. For what else is deleted, see the Privacy Policy.

Your team's people on your phone

On the Team tab, a team's coach and coach assistants, and the club's owner and admins, see a People button. A number on it means requests are waiting. A team manager doesn't have it.

Requests

Players you invite join as soon as their family confirms, so they don't wait for you. Requests holds only requests that were already waiting. For each one, tap Approve or Decline. Approve all approves every request at once. A request for a child shows who asked ("Asked by") and may be marked Under 13. If another player on the team has the same name, the request says so: check it isn't the same child asked for twice.

A coach assistant sees the lists but can't decide: "You can see who's on the team, but only the coach or the club's owner and admins decide."

A player's card

Players lists everyone on the team, with Find a player to search. Tap a player to open their card. It shows how long they have followed the team and, under Parents and guardians, each parent with the email and phone they shared. Tap one to write or call. "No contact shared" means the parent gave none.

Remove a player or a parent

On the player's card:

  • Remove from the team takes the player off the team. The card asks first. Once removed, they can come back only with an invite.
  • Remove from this team, beside a parent, takes that parent off this team only.

Players can't leave a team by themselves. The coach, the owner or an admin takes them off.

Add players by email

On People, tap Add players. The coach, the owner and admins can do this.

  1. For each player, type the Player's name and the Parent's email. Teen's own email (optional) is for a teen who should get their own login. Add another adds a row, up to 50.
  2. Or tap Scan a list and pick a screenshot, or Take a picture of a printed list. The first time, your phone asks to use your camera. Your phone reads the names and emails from the picture. The picture is read on your phone. It isn't saved or sent. Check each row it fills in, and add a name where one is missing.
  3. Tap Check. Each row says Ready, Already on the team, Already invited, Removed from the team before, Add the player's name, Not an email or Listed twice.
  4. Tap Send.

Invites lists what you sent, each marked Invited, Opened or Joined, with Resend and Cancel. What the family sees, and how a spot works, is in "Invite people to your team".

What you do in the web app only

These are in the web app, not on your phone:

  • The club's crest and time zone
  • Changing someone's roles, removing staff and leaving a club
  • Accepting a staff invite
  • Transfer ownership and Delete club
  • Size, Level and Billing
  • Team documents, match plans, the drill designer and Match Studio

Club and team changes on your phone need the internet. They aren't saved up to send later.

Clubs and teams: if something goes wrong

  • "Staff need to be 18 or over." Staff are adults. The app only knows your year of birth, so it can still say this in the year you turn 18. You can still use UmbraX Pro as a player. Ask an adult at your club to start it.
  • "Add your name to your profile first." Add your name in your dashboard's Account tab, then try again.
  • "You already coach on your own." You can have one club of that kind. Add your teams to it.
  • "You can own up to 5 clubs." Transfer or delete one first.
  • "There's already a team called" and the name. Pick another name, or put the team in another season.
  • "A club can have up to 100 teams." Archived teams count too.
  • "There's already an invite for" and the address. Use Resend on the invite that is waiting.
  • "The invite is saved, but its email could not be sent. Use Resend on it in a minute." The invite is in the list. Tap Resend.
  • "A club can send up to 20 invites an hour. Try again later." Wait and send the rest later.
  • "Your team's plan has 3 staff seats. Ask your club owner about a Club plan." A club that pays for one team has room for 3 staff, the owner included. See "Club billing".
  • "This invite has expired or been used." Ask the person who invited you for a new one.
  • "This invite link isn't valid. Ask whoever sent it for a new one." The link was cancelled, or part of it is missing.
  • "That code isn't right. Check it, or send a new code." After 5 wrong tries the code stops working: "Too many tries. Send a new code." A code also stops after 15 minutes.
  • "Too many codes. Try again in an hour." Wait, then send a new code.
  • "The details were saved, but the crest was not." Try another picture.
  • "No admins yet. Make someone an admin in People first; ownership can only go to an admin." Open People, choose Change role beside the person and make them an admin. Then come back to Settings.
  • "This club isn't available to you." You aren't on this club's staff, or the club was deleted. Choose Go to your dashboard.
  • The picture couldn't be read ("That picture could not be read. Try another one." or "No email address was found in that picture. Try a sharper screenshot."). Take a sharper picture, or type the rows.
  • "Tools are for coaches and clubs" The web app's tools are for staff. A team manager has Scheduling only: "As a team manager, you have the Scheduling tool. The rest are for the team's coaches." Players and parents find their team's schedule, plans and drills on their dashboard. If you should be on the staff, ask the club's owner or an admin to invite you (see "Invite staff").
  • A message about your club's plan. See "Club billing".
  • Still stuck? If you're 13 or over, use Contact support (see "Contact support"). If you're under 13, ask a parent or guardian.

UmbraX Teams: billing

Club billing

A club pays for UmbraX Teams in the web app, once a year for each team. Nothing is sold in the app: on the phone, UmbraX Teams only shows your club's plan.

Players, parents and guardians never pay for a team, and players joining or leaving never change the bill.

For the rules on payment, renewal and refunds, see the Terms of Use.

Where is Billing?

In the web app, open your club and choose Billing.

  • The club's owner sees everything and is the only one who can pay, change the plan or change the card.
  • Admins see the same page without those buttons. It says "Only the club's owner can change the plan or the card."
  • Coaches, coach assistants and team managers don't see Billing. They see a line when the club's plan needs attention, and it tells them to ask the club owner.

The top of the page shows Plan and Teams. Once the club pays for its teams it also shows Next bill, and the owner sees Payment method.

What a team's price depends on

Each team has a size and a level. Together they set what the team costs a year.

Size is how many players the team holds.

SizeHoldsFor example
SmallUp to 14 players4v4, 5-a-side, 7-a-side
MediumUp to 18 players9-a-side
LargeUp to 25 players11-a-side

The formats are only examples. Any sport fits a size.

Level is what the team gets.

  • Core: teams, seasons and staff roles, the schedule, attendance, the roster, documents and notifications, the drill designer, team drills and playbooks. Parents and guardians read the team, and players see what the team shares.
  • Complete: everything in Core, the full player app for every player on the team, match plans, Match Studio, drills from a diagram, and the club library.

A club can have teams on both levels.

One team or more. A club with one team pays the one-team price. A club with two or more teams pays a lower price for each team. The page says which applies: "One team pays the one-team price." or "Two or more teams: each at the lower price."

The prices are on the Pricing page of the web app. The Billing page also shows each team's price, and the total, before you pay.

A club with no plan yet

A new club starts with no plan. Its Billing page says No plan yet. and "Add the club's teams, then pay for them below. Until then nothing else can change. Or ask us for a pilot."

Until the club has a plan or a pilot:

  • You can change the club's details, add and change seasons, and add, change, archive and restore teams.
  • Nothing else can change. Staff who try see "Your club has no plan yet. Ask your club owner." The owner sees "Your club has no plan yet. Pay for its teams on Billing."
  • A line at the top of the club's pages says the club has no plan yet. The owner's line has a link, Choose a plan, to Billing.

A club that was set up before billing began also says No plan yet., with "The club keeps everything it has today until it chooses a plan."

Try UmbraX Teams with a pilot

A pilot is free. It ends on its date and never charges by itself. To keep going after it, the club chooses a plan.

Ask for one. On the Billing page of a club with no plan yet, Ask for a pilot opens an email to us. If no email opens, use Contact support and pick Billing. A pilot comes as a link.

Claim a pilot link.

  1. Open the link. The page is titled UmbraX Teams pilot and shows how long the pilot runs and how many players it holds, for example "6 months, up to 75 players".
  2. Choose Sign in to claim, and sign in or create an account.
  3. To start a new club, fill in Set up your club (Set up a new club if you already own one) and choose Create the club and start the pilot. The pilot starts when you create the club.
  4. If you already own a club that never had a pilot, you can use Put it on a club you already have instead: pick the club under Your club and choose Put the pilot on this club.

Good to know:

  • A pilot link works once, and stops working 30 days after we make it. A link that is used, cancelled or too old says "This pilot offer is closed. Ask us for a new link."
  • Some links are for one email address. The page then says "Only the address this was sent to can claim it." Signing in with another address is refused: "This offer is for another email address. Sign in with the address it was sent to."
  • A club gets one pilot. A second try says "This club has had its pilot."
  • A club that already has a plan can't take a pilot. You see "The club already has a plan. Change it instead."

During the pilot. Billing shows "Pilot until" with the date, and how many players the pilot holds. The club has everything in Complete. When the pilot has all the players it holds, the next one is refused: "The club's pilot is full. Ask your club owner." The owner pays for the club's teams, or asks us about the pilot with Contact support.

When it ends. In the last 30 days, a line on the club's pages says when the pilot ends, and the owner is told 30, 14, 7 and 1 days before. After the last day the club is read-only until the owner pays for its teams (see "What read-only means").

Pay for your teams the first time

Only the club's owner can do this.

  1. Add your teams first. With none, Billing says "Add a team first." and Go to Teams takes you there.
  2. On Billing, under Your teams, set each team's size (for example "Small, up to 14 players") and level (Core or Complete). The team's price shows at the end of its row.
  3. For each team, choose how long it is paid for: All year, or 1 to 9 months for a team that only runs a season (see "Short terms: a team that only runs a season"). One team at least has to stay on All year. If none does, the page says "Keep one team all year." A club coming back from read-only pays by the year: it can't pick months.
  4. Pick the term: 1 year, or 2 to 5 years with 10% off (see "Commit to a term").
  5. Read the total under the list. It shows the yearly amount and, with short terms, what is paid once and the amount due today.
  6. Choose Pay by card or bank. A payment page opens, run by Stripe, the company that takes payments for us. You can pay by card or US bank account, and sales tax is added where it applies.

Back on Billing, you see "Thanks. The plan shows here once the payment goes through." For up to a minute the button reads Confirming your payment… and can't be pressed, so you can't pay twice. If you leave Stripe's page without paying, Billing says "Nothing was charged."

A team with more players than its size holds has to be made bigger before you pay. The page names it, for example "U12 Blue has 16 players, and its size holds 14. Make it bigger first."

With a term of 2 years or more, the 10% off on the first bill covers the short terms on that bill too. The total shows it.

Change your teams during the year

Add a team

In between yearly bills, the owner pays only for what they confirm.

  1. On Billing choose Add a team, or open Teams in your club.
  2. Fill in the team. Size is "How many players the team holds. It sets what the team costs." Level is Core or Complete.
  3. If the team needs paying for, a price sheet opens first: Add a team to the plan. It shows what you pay now for the time left until the next bill, and what the team costs a year after that.
  4. If a short term costs less to start, the sheet asks How long. The short term is marked Costs less. If more than one length costs less, a list under it lets you pick the months. The other choice is the rest of the year.
  5. Choose Confirm and pay. The card is charged once and the team is added.

If the card is declined, nothing changes and nothing is charged. The sheet shows your bank's reason. Change the card under Payment method if you need to, then try again.

Sometimes there is nothing to pay. A paid place is one team of a size and level that the club has paid for. Billing tells you when one isn't in use, for example after you archived a team: "Add or restore a team that fits it and there is nothing to pay until the next bill."

Staff who aren't the owner can't pay. If a new team needs a place, they see "This team needs a paid place. Add it from Billing."

Make a team bigger or move it to Complete

  1. On Billing, find the team and choose Change.
  2. Under Size or Level, the box the team is on is marked Now. A bigger size, or Complete, is marked Upgrade.
  3. Pick it. A price sheet named Change and the team's name shows what the team becomes, what you pay now for the time left, and the yearly price after that.
  4. Choose Confirm and pay.

Changes that cost nothing

A smaller size, or a move down to Core, is marked Next bill. Pick it and the sheet says "Nothing to pay now." with the price from the next bill. Choose Change the team. The team changes at once and the bill follows at renewal.

To stop paying for one team, archive it on the Teams page.

The page puts it this way: "A team you archive, make smaller or move to Core stays paid until the next bill, then comes off it."

A team can't be made smaller than the players it has. You see, for example, "This team has 16 players. That size holds 14."

Short terms: a team that only runs a season

A short term pays for a team for 1 to 9 months, once. The team is never on the yearly bill, and a short term doesn't renew unless you turn on the repeat.

  • You can pick a short term for a team on your first payment, or when you add a team during the year.
  • One team in the club has to stay on All year.
  • A short term you add during the year, more months and Run it again are paid by card. If the club pays from a bank account, you see "This is paid by card. Update the card on Billing, then try again."
  • A short term runs 9 months at most, with any months you add later.

Once the club has a short-term team, Billing lists teams under All year, Short term and Ended.

Add months. On the Short term list, choose Change on the team. Paid for shows the months so far, for example "3 of 9 months". Add months opens a sheet where you pick How many months and Confirm and pay.

Size and level. The same Change row has Size and Level. A bigger size, or Complete, is marked Upgrade. A short-term team can't be made smaller or moved to Core. You pay only if what the team has paid for doesn't already cover the change.

Repeat. Under Repeat, turn the switch on. It then reads Every year. With the repeat on, the card is charged a year after the term started and the team comes back for as long as it ran. You hear 14 days before. Off, it reads "The team ends with its term." If a repeat can't be charged or the team can't be brought back, nothing is charged, the repeat is turned off and the owner is told.

When a short term ends. The owner is told 14 days and 3 days before. After its last day the team is archived, with its players, plans and history kept. It isn't archived if a yearly place covers it by then. The team moves to the Ended list: "Its players and history are kept."

Run it again. On the Ended list, choose Run it again. Pick the months and Confirm and pay. The team comes back with its players. Two things can stop it: "Another team has this name now. Rename one of them first." and "This team's season is archived. Restore the season first." The Ended list also has Repeat every year and Turn off the repeat.

Short-term teams aren't on the yearly bill. Under Next bill the page says "Short-term teams aren't on this bill. Each is paid once."

A team with no paid place

A team that nothing pays for shows No paid place yet. on Billing. Until it is paid for, nothing on it can change and it takes no new players. Staff see "This team needs a paid place. Ask your club owner to pay for it on Billing."

The owner chooses Pay for it on the team's row, checks the price and chooses Confirm and pay.

When a team is full

A team takes players up to what its size holds. After that, new players and invites are refused with "This team holds 14 players. Ask the owner to make it bigger." (or 18 for Medium). The owner makes the team bigger on Billing. If you are a parent or a player and you see this, tell your coach. The coach asks the club's owner.

A Large team holds 25 players. Past that the message is "This team holds 25 players. Add a second team." Staff seats. A club that pays for one team has room for 3 staff, the owner included. The person who would be the fourth sees "Your team's plan has 3 staff seats. Ask your club owner about a Club plan." when they accept the invite. A club with two or more teams has no such limit.

Commit to a term

A term is 1 to 5 years. With a term of 2 years or more, each yearly bill is 10% less for those years. You are still billed once a year. A term is not a short term: a term is how many years the club commits to, and a short term is one team paid for a few months.

  • On your first payment, pick the term before you pay.
  • Later, the owner can choose Commit to a term on the Plan card. Pick How many years (2 to 5) and choose Commit. "Nothing is charged now." The lower price starts from the next bill.
  • The Plan card then shows the term and the date its lower price runs to.

The page also says: "Billed each year. Leaving after the first year repays that year's discount." The Terms of Use have the full rule.

When the years end. The price goes back to the full one. The owner is told 30 days before that bill, and the Plan card says the term is up and "the next bill is at the full price." Choose Commit to a new term to keep 10% off. While a term's lower price still runs, or the plan is cancelled or has a failed payment, the button isn't on the Plan card.

Your card, invoices and receipts

  • Payment method: Update card opens Stripe, where the owner changes the card or bank account. Stripe keeps them, not UmbraX Pro.
  • Invoices and receipts: every bill, with Download PDF and View.
  • Next bill: the yearly amount, the period you have paid for, and the day it renews "for the teams the club has then". The owner is told 30 days before.

Cancel the club's plan

Cancel the club's plan stops the yearly renewal for every team. It is the whole club's plan, not one team's. To stop one team, archive it on the Teams page.

  1. On Billing, choose Cancel the club's plan.
  2. Read what happens, then choose Cancel the plan, or Keep the plan to go back.

After you cancel:

  • Everything works until the end of the period you paid for. Then the club goes read-only.
  • Nothing is refunded for the time left.
  • Yearly repeats stop too. No short-term team is charged or brought back while the plan is cancelled.
  • A short-term team paid past that date goes read-only with the club. Those months are not refunded.
  • Players keep their own drills and history.

Changed your mind? Until the period ends, Reactivate undoes the cancellation and the plan renews as before.

If a payment fails

The owner is told, in their notifications and by email. Billing says "Payment failed. Full access until" with a date, and a line on the club's pages tells staff the day the club goes read-only.

  • The club keeps full access for 30 days.
  • The owner's line has a link, Update the card, to Billing. There, Update card under Payment method opens Stripe. Reminders come 7, 3 and 1 days before the 30 days are up.
  • If Billing still says "Payment failed" after you changed the card, use Contact support and pick Billing (see "Contact support").

What read-only means

A club goes read-only when the 30 days after a failed payment run out, when a cancelled plan's period ends, or when a pilot ends with no plan.

  • Staff can see, but not add or change. They see "Your club's plan is read-only. Ask your club owner." The owner and admins can still export (see "Export the club's content").
  • Players and parents still see what was shared. They can still answer attendance and choose what they share on the roster.
  • 60 days into read-only, the club is hidden from players and parents. Staff can still see, and the owner and admins can still export.
  • Nothing a player made is deleted or locked.
  • A club that stays read-only is deleted in the end. Export what you want to keep before then.

To unlock the club, the owner opens Billing and chooses Reactivate, or pays for the teams again under Your teams.

Export the club's content

Under Export, Export the club's content downloads a file with the club's teams, seasons, schedules, drills and plans. It works whatever the plan, read-only included. The owner and admins can do this.

Refunds for a club's plan

A full refund is possible within 30 days of your first payment. The owner's Plan card shows the date: "A full refund is possible until" the date, then "Ask us." To ask, the owner uses Contact support and picks Billing (see "Contact support"). After a refund the club is read-only.

Nothing is refunded for the time left when you cancel. See the Terms of Use.

What players, parents and staff see of the club's plan

  • Staff see the plan's name on the club's pages. They never see prices. When something needs the owner, a line says so: a failed payment, read-only, no plan yet, or a pilot ending.
  • When a team's level doesn't include a tool, staff see "Your club's plan for this team doesn't include this. Ask your club owner." For a tool that isn't tied to one team, it is "Your club's plan doesn't include this. Ask your club owner." The owner also gets a link, See the club's billing. To see who the owner is, open the club in the web app and choose People: the owner is marked Owner.
  • Players and parents see no billing lines and no prices. They are not asked to pay for anything. If a message ever tells you to ask your club owner, tell your coach.

Your club's plan on your phone

In UmbraX Teams, Profile has a Plan section. It shows your club, the plan's name, "Pro from" and the club's name when the club gives you the full player app, and "Billing is managed on the web."

Staff also see the plan's state there, such as "Renews on" with the date, "Payment failed. Ask your club owner." or "Read-only. Ask your club owner.", and a line at the top of the Team tab when the club's plan needs attention.

There is nothing to buy in UmbraX Teams on the phone. A feature your club's plan doesn't include says "Not in your club's plan" and "Your club's plan doesn't include this. Ask your club owner."

A child's phone shows no Plan section.

Still stuck with billing?

Use Contact support and pick Billing (see "Contact support"). Have your club's name ready. Never send a card number.

Does my club's plan change my own Pro?

A Pro or Pro Family subscription you bought in the App Store is yours. A club's plan never changes it.

UmbraX Teams: schedule, attendance and notices

Your team's schedule

In UmbraX Teams, a team's schedule holds its sessions: each one is a Training or a Match. The staff keep it in the web app. Everyone on the team sees it, in the web app and on the phone.

Who does what:

You areSee the scheduleAdd and change sessionsGive a match's score
The club's owner or an adminYesYesYes
The team's coachYesYesYes
The team managerYesYesYes
A coach assistantYesNoYes
A player, 13 or overYesNoNo
A parent or guardianYesNoNo
A child's phoneYesNoNo

A parent or guardian sees the schedule of a player under 18, once the coach has approved the player.

See the schedule

On your phone

  1. Open the Team tab and pick your team.
  2. The Schedule card shows a calendar. Switch between Week and Month. A dot under a day means a session: trainings and matches have their own colours, and a cancelled one is grey.
  3. Tap a day to see its sessions under the calendar. Nothing on this day. means the day is free. No sessions yet. means nothing is coming up at all. Today takes you back to today.
  4. Tap a session to open its details.

See all lists every session from today to three months ahead, by month. Pull down to read it again.

Once a played match has its score, Last match shows above the calendar with the score.

The schedule on the phone is for reading. The staff add and change sessions in the web app. The one thing the staff change on the phone's schedule is a match's score (see "Give a match's score").

To say whether you're coming, see "Say if you're coming". For reminders and changes, see "How notifications work".

In the web app

  • Choose Teams in the menu to open your dashboard. Coming up shows your next 3 sessions across your teams. See the schedule opens that team's schedule on the session's day.
  • Next to each team in Teams you follow and Your players, Schedule opens the team's schedule.

On the team's schedule, switch between Week and Month, or choose See all for a list (Back to the calendar returns). In the list, Earlier and Later move through the dates, and Back to now returns to today. Choose a session to open its details.

What a session's details show

  • The date, the time and how long it lasts.
  • Call: when to arrive, if the coach set a call time.
  • For a match, the opponent, and home or away if the coach set it.
  • The place. Directions opens it in Apple Maps, Google Maps or Waze.
  • The coach's note.
  • For a cancelled session, Cancelled, and the reason if the coach gave one (on the phone, under Why it's off).
  • For a played match, Result: the score and the match report.

Times in another time zone

Session times are shown as the staff typed them. If the session is in another time zone than your device, the time is marked with its zone, and your own time shows beside it, like "10:00 AM your time". If the club has no time zone, times show as entered on every device.

Add the schedule to your calendar

  • On your phone: open a session that isn't cancelled and tap Add to Calendar. Your phone opens a new calendar event filled in with the session. Pick a calendar and save it.
  • In the web app: Add to calendar saves the sessions on show as a calendar file that you can open in your calendar app. To save one session, open it and choose Add to calendar there.

A saved event or file does not update by itself. In the web app, add the file again to bring in changes.

For staff: plan the schedule in the web app

Open Tools, then Scheduling. Pick your team from the list at the top. With more than one club, pick the club first. View it by Week, Month or List.

A coach assistant sees: "You can see this team's schedule. Its coach, the club's owner or admins change it."

Add a session

  1. Choose Add session. In Month, you can also choose a day's number to add a session on that day.
  2. Under Training or match, pick Training or Match.
  3. Set the Date and Time. The line under them says which time zone the times are in (see "Time zones for staff").
  4. Call time is when players should arrive: None, or 15 to 120 minutes before the start.
  5. Length (minutes) is 15 to 300.
  6. For a match, fill in Opponent (a club or team, never a person) and Home or away: Home, Away or Not set.
  7. Place takes up to 80 characters. As you type, address suggestions may show under it; picking one also sets the session's time zone to the address's. Recent places offers the team's last places.
  8. Note (optional) takes up to 280 characters. Everyone on the team reads it.
  9. Choose Save.

A new session starts with the time, length and call time the team last used for that kind. If it clashes with another session, the panel says "It overlaps ... on this day." You can still save it.

Repeat a training every week

  1. In a new training, tick Repeats every week.
  2. Under Days, pick the days of the week.
  3. Set Until, the date the series ends.

A series can run up to 12 months and hold up to 104 sessions. If the date you picked isn't one of the days, the first session moves to the first of those days, and the panel tells you the date. Matches don't repeat: add each match on its own.

To turn a single training into a weekly series, open it and tick Repeat every week from this one. Its own day stays picked, because the series starts with that session.

Change a session: Just this one, or This and later ones

Open the session. If it repeats, the panel asks "This training repeats every week. What do you want to change?"

  • Just this one changes only that session. Later changes to the whole series leave it alone.
  • This and later ones changes that session and the ones after it. Sessions in the past are never changed. It can't move the date: to move one session to another date, pick Just this one. If you change the days, later sessions move to the new days.

The same choice applies when you cancel, restore or delete. Change lets you pick again.

A training in a series can't become a match: Training or match is greyed out. Cancel it and add a match instead.

Cancel, restore or delete

  • Cancel session keeps the session on the schedule, marked Cancelled. You can add a Note for players (optional), like "Pitch closed". It shows with the session. Confirm with Yes, cancel.
  • Restore puts a cancelled session back on, and clears the reason.
  • Delete takes the session off everyone's schedule. Its score, published plans, videos and drills go with it. To keep it showing as off, cancel it instead. Confirm with Yes, delete.

A team manager can't delete a session that the coach put plans, videos or drills on. The web app says: "The coach put plans, videos or drills on this session. Ask the coach to delete it, or cancel it."

Copy a session

Open the session and choose Copy to another date. A new session opens, filled in the same way, one week later. Change the date if you need to and choose Save.

Time zones for staff

Under the date and time, one line says which clock the session uses:

  • "Times are in ... (the club's)." The club's owner or an admin sets the club's time zone in the club's Settings, under Time zone.
  • "Times are in ... (from the address)." You picked an address suggestion for the place.
  • "Times are in ... ." You picked the time zone yourself with Change.
  • "Times show as entered on every device." The club has no time zone and you picked none.

Change lets you pick a time zone for this session. Type times as the venue prints them.

Give a match's score

The club's owner and admins, the coach, coach assistants and the team manager can give a match its score, from the day of the match. Everyone on the team then sees it.

On your phone

  1. Open the match from the Schedule card or See all.
  2. Under Result, tap Give the score.
  3. Set the goals for Us and Them with − and + (0 to 30 each).
  4. Match report (optional) takes up to 600 characters. Players and parents read it, so keep it about the team.
  5. Tap Save.

Change opens it again. Clear the score removes the score, and the match report with it.

In the web app

On the match's day, the Result card shows the score, or No score yet. Choose Give the score, set Us and Them, add the Match report (optional) if you want one, and choose Save. Change opens it again, and Clear the score is there too.

In Scheduling, those who can change the schedule see a line above the calendar that says how many played matches still need a score, like "1 match needs its score."

Rules for the score

  • Only a match has a score. A match changed into a training loses its score.
  • A match that was cancelled, or moved to a later date, can't be given a score. If it already has one, you can only clear it.

The schedule: if something goes wrong

  • "This schedule isn't open to you." or "This team's schedule isn't open to you." You aren't on this team right now. Your request may still be waiting for the coach, the coach may have taken you (or your player) off the team, the team is archived, or the club has stopped using UmbraX Teams for now. Ask your coach if you think it's a mistake.
  • "Showing the schedule as last saved." Your phone couldn't reach UmbraX Pro, so it shows the schedule it last read, with when that was. Check your connection, then pull down in See all, or tap Try again if the card shows it.
  • "UmbraX Pro could not be reached. Check your connection and try again." The web app is offline. Check your connection and choose Try again.
  • "Only the club's owner or admins and the team's coach can change its schedule." A coach assistant can't change sessions. (A team manager can, though the message doesn't name them.)
  • "This team is archived. Restore it to change its schedule." An archived team's schedule can't be changed.
  • "A match needs an opponent." Fill in Opponent before you save a match.
  • "A session lasts 15 to 300 minutes." Change Length (minutes).
  • "This and later ones can't move the date. Use Just this one." Open the session again and pick Just this one.
  • "The days it repeats on have to include this session's day." When you make a training repeat, keep its own day picked.
  • "A series can run up to 12 months." or "A series can have up to 104 sessions." Pick an earlier Until date.
  • "A team can have up to 400 sessions ahead." or "A team can have up to 1000 sessions in all." Delete sessions you no longer need, then try again.
  • "The match hasn't been played yet." You can give the score from the day of the match.
  • "Restore the match to give its score." The match is cancelled. Restore it in the web app first.
  • A message with a number in brackets, like "That could not be saved (500)." Something went wrong on our side. Try again in a minute.
  • Still stuck? If you're 13 or over, use Contact support (see "Contact support"). If you're under 13, ask a parent or guardian.

How attendance works

In UmbraX Teams, attendance is how a team knows who's coming. Before a session, each player answers Yes, Maybe or No. At the session, the staff take the Register: who was there.

Everyone on the team sees the answers: the staff, the players, and the parents and guardians of players under 18.

Who does what:

You areAnswer forSet a player's answerTake the registerChange the team's settings
A player, 13 or overYourselfNoNoNo
A parent or guardianYour childNoNoNo
A child's phoneNobody: it only shows the answersNoNoNo
A coach assistantYourself, as staffNoYesNo
The team managerYourself, as staffYesYesNo
The team's coachYourself, as staffYesYesYes
The club's owner or an adminYourself, as staffYesYesYes

Say if you're coming

On your phone

  1. Open the Team tab and pick your team.
  2. The Attendance card is under the Schedule card. It shows the session on the day you picked in the calendar, or the next session.
  3. Tap Yes, Maybe or No.
  4. If you tap No, you can pick a reason under Why not? (optional): Injured, Sick, Away, School or work, Family or Other. You don't have to.

You can also answer from See all on the Schedule card, or in a session's details. To give a reason for a No, use the Attendance card.

In the web app

Open your team's schedule, or look at Coming up on your dashboard. Each session has a button with your answer on it. Until you answer it says Answer, Expected or "Answer by" with a time (see below). Choose it, then Yes, Maybe or No. After No, you can pick a reason.

You can also open a session and answer on its Attendance card.

Good to know

  • Everyone on the team sees your answer and the reason you pick. There is no box to type in: the reasons are a fixed list.
  • Change your answer by picking another one. Clear removes an answer you gave. It doesn't show on an answer the coach set.
  • Maybe never counts as coming.
  • A parent or guardian answers for a child under 18. With more than one child on the team, each child has their own answer, by name.
  • On a child's phone, the answers show but can't be changed. It says "Ask your parent to change it."
  • Set by the coach under your answer means a member of staff set it for you, for example after you called. You can still change it.
  • You can't answer for a cancelled session, or for one that was more than a week ago.

What "Expected" means

A team can expect everyone at its trainings. Then you show as Expected until you answer, and you count as coming. Answer No or Maybe if you can't make it or aren't sure. A match never expects anyone: every player answers.

"Answer by" and "Changed late"

For a match, the team can set a time when answers close. Until you answer, your button says when, like "Answer by Fri 6:00 PM" on the phone or "Answer by Fri 6 pm" in the web app.

You can still answer or change your answer after that time. It is then marked Changed late, so the coach knows the lineup may need another look.

The nudge before answers close is in "Choose what you get".

"Time changed"

If the coach changes a session's time, your answer is marked Time changed until you answer again. If the coach moves the session to another date, every answer for it is cleared, the staff's too, so answer again.

What you see about the team

On a session's Attendance card:

  • The count, like "11 yes, 4 expected, 2 maybe, 3 no, 1 not answered".
  • Every player by name, with their answer, and the reason if they picked one.
  • Changed late and Time changed under a name.

The staff also see when a late answer was changed, "No adult so far" or "1 adult so far" until two members of staff have said yes, for a match how the number coming compares with the players a side, like "10 in for 9 a side: 1 sub", and a line for a shared drill that the numbers don't fit, like "Needs 8, 6 coming". On the phone, the staff also see Set by the coach under an answer a member of staff set.

See your attendance record

In the web app, your team's schedule shows My record under the calendar: how many sessions you came to, like "Came to 18 of 22", and your mark for each session with a register: There, Late, Told us or Didn't tell us. A parent or guardian sees each child's record. It says No register until the staff have taken one.

Your record is your own. It doesn't compare you with other players.

Take attendance (for staff)

Answer for yourself

Every member of staff answers for themselves on the session's Attendance card, beside You. If your own child plays on the team, your answer is labelled You (staff) and your child's has their name. The card says "No adult so far" or "1 adult so far" until two members of staff have said yes.

Set an answer for a player

The coach, the team manager, and the club's owner and admins can set a player's answer, for example when a parent calls. A coach assistant can't.

  1. Open the session and find the player on the Attendance card.
  2. Choose Set an answer, then Yes, Maybe or No.

The player and their parents see Set by the coach. Back to the default removes the answer you set.

Take the register

The register opens 30 minutes before the session starts and closes a week after. Any member of staff can take it, coach assistants too.

  • On your phone: open the session, and under Attendance tap Register. Everyone who said yes, or is expected, starts ticked. Tap a player who wasn't there. Hold a player's row to mark them Late. Each tap is saved. With no signal, it says "Saved on this phone. Sends when you have signal."
  • In the web app: open the session and choose Register on its Attendance card. Untick a player who wasn't there, and choose Late for a player who came late. Each change is saved, and the sheet says "Register saved."

A player who wasn't there shows Told us if they answered No before the session started, and Didn't tell us if not. A Maybe doesn't count as telling you. Two members of staff can take the register on two devices: for each player, the latest tap is kept.

The team's settings

The coach and the club's owner and admins choose how the team answers. In the web app, open the team's page and find Attendance.

  • Trainings: Expect everyone (players count as coming unless they say otherwise) or Ask everyone (each player answers). A new team starts on Expect everyone.
  • Matches close: 2, 12, 24, 48 or 72 hours before the match, or No close. A new team starts at 24 hours.

Choose Save.

The season sheet

In the web app, open Scheduling and choose Season sheet. It has one row for each player, sorted by name, and one column for each session with a register. Each cell says There, Late, Told us or Didn't tell us, and Came counts the sessions the player came to. All staff can read it, coach assistants too. It can't be downloaded.

Answer with no signal

On the phone, the Attendance card shows the answers it last read. An answer you give, or a register mark you tap, is saved on the phone and sent when you have signal again. An answer still keeps the time you tapped it, so it isn't marked late because your phone was offline.

If you sign out while answers are still waiting, the phone asks first: "Some answers aren't sent yet. Sign out anyway?" If you sign out, they are not sent.

The web app needs the internet to answer.

How long attendance is kept

Answers and register marks are deleted 30 days after the team's season ends, or 12 months after the session if the team has no season or the session is outside the season's dates. When a player leaves the team, their answers and marks on it are deleted at once. See the Privacy Policy.

Attendance: if something goes wrong

  • "This team's attendance isn't open to you." You aren't on this team right now. Your request may still be waiting for the coach, or the coach took you (or your player) off the team. Ask your coach if you think it's a mistake.
  • "That could not be saved. Try again." Check your connection and try again.
  • "That's a lot of answers. Try again in a while." You changed answers many times in an hour. Wait, then try again.
  • "This session is cancelled." A cancelled session takes no answers. If the coach restores it, your earlier answer is still there.
  • "That session was more than a week ago." Answers can't be changed once a session is more than a week past.
  • "Check the time on your device." Your device's clock looks wrong. Set its date and time, then try again.
  • "Only the coach, owner or admins can answer for a player." A coach assistant answers only for themselves. (A team manager can set a player's answer, though the message doesn't name them.)
  • "The register opens 30 minutes before the start and closes a week after." The register isn't open for this session right now.
  • "The team is archived." An archived team's attendance can't be changed.
  • "The season sheet is for the team's coaches." Only the team's staff can open the season sheet.
  • Still stuck? If you're 13 or over, use Contact support (see "Contact support"). If you're under 13, ask a parent or guardian.

How notifications work

UmbraX Teams tells you about your teams: a reminder before a session, a change or a cancellation, and the week ahead. Every notice goes to two places:

  • Your inbox in the web app. Every notice is kept there, whatever your phone does.
  • Your phone, if you let it show notifications.

You choose what you get in the web app. The phone has no settings screen for notices of its own.

Read your inbox

In the web app, choose Teams in the menu, then the Notifications tab. Inbox is at the bottom of the page.

  • A notice you haven't read is highlighted, and the heading says how many, like "2 unread".
  • Open takes you to what the notice is about, such as the session on your team's schedule.
  • Mark read marks one notice. Mark all read marks them all.

With no notices, it says "Nothing yet. Reminders and changes show here as well as on your phone."

Get notices on your phone

When you sign in to UmbraX Teams on your phone, the phone asks once whether UmbraX Pro may send you notifications.

  • If you allow it, notices arrive on your phone. Tap one about a team to open UmbraX Teams.
  • If you don't allow it, nothing arrives on your phone. Every notice is still in your inbox in the web app.

To change your mind later, turn notifications for UmbraX Pro on or off in your phone's Settings.

UmbraX Pro mode, with no account, never asks and sends no notices.

Choose what you get

On the Notifications tab, What you get has a tick box for each kind. All of them start ticked.

KindWhat it sendsWho gets it
Training and matchesA reminder before each session, and a notice when a session is moved, cancelled, put back on or taken off the scheduleEveryone on the team
Answering and the countA nudge about a day before a match's answers close, if you (or your child) haven't answered. For staff, a notice when fewer players are coming to a match than are on the teamPlayers and parents; staff
Joining a teamA request waiting, and the answer to itWhoever asked, and the staff who decide
New on the teamA document, a match plan, a video or drills put on the scheduleEveryone on the team who can see them
For coachesA match in the next few days with no plan, and a played match with no scoreThe coach, and the club's owner and admins
The week aheadOne message each Sunday with the week's sessionsEveryone on a team
Leave byWhen to leave for a sessionYou, if you saved where you leave from

Tick or untick the kinds, then choose Save. "Saved." shows when it's done. A kind you untick is not sent at all: it won't be in your inbox either. With Training and matches unticked, you get no cancellations.

The person who makes a change to the schedule doesn't get a notice about their own change.

When the reminder comes

The reminder for a session comes two hours before its call time. If the coach set no call time, it counts 30 minutes before the start as the call time. It says when the session starts and when to arrive.

The week ahead

Each Sunday at 5 pm, you get one message for each of your teams with something on in the next seven days: how many trainings and matches, and which is next. A team with nothing on sends nothing.

The 5 pm is on the clock you pick under Time zone (see "Quiet hours and your time zone").

Get told when to leave

Leave by tells you when to leave home for a session.

  1. On the Notifications tab, under Where you leave from, type Your address, such as "1 Riverside Way, Frisco, TX".
  2. Keep Leave by ticked.
  3. Choose Save.

Then, about an hour before you need to leave, you get a notice like "Leave by 16:20", with how long the trip should take. It aims to get you there for the call time, or 30 minutes before the start when there is no call time. If the time to leave changes, you may get a new notice.

Good to know:

  • The session needs a place that can be found on a map. A session with no place sends no Leave by notice.
  • Your own address has to be found on a map too. If it isn't, it is still saved and nothing tells you: no Leave by notice comes. Type a fuller address and choose Save.
  • The travel time is an estimate. Check the roads yourself before you set off.
  • Your club and your team never see your address. It is used only to work out when to leave.
  • If you're under 18, ask a parent or guardian before you add your home address. To remove it, clear the box and choose Save. For how your data is handled, see the Privacy Policy.

Quiet hours and your time zone

An account starts with No quiet hours ticked. Untick it under Quiet hours: From and To fill in as 22:00 and 07:00, and you can change them. Between those times, notices wait to reach your phone until the quiet hours end. They show in your inbox in the web app straight away. Tick No quiet hours to turn them off again. Choose Save.

What still comes through. Three notices arrive straight away, even in quiet hours:

  • A session is cancelled.
  • A cancelled session is put back on.
  • A session is taken off the schedule.

A session that is moved to another time or place waits for your quiet hours to end, like any other notice.

Time zone. Quiet hours and the Sunday message use the clock you pick under Time zone. Check it is yours: a new account starts on UTC, the world's standard clock, which is probably not your local time. The list has nine zones for now; if yours isn't there, pick one with the same clock time. Choose Save after you change it.

Pause one team

If you're on more than one team, you can quieten one of them.

  1. In the web app, open the team's schedule and choose Settings.
  2. Under Your notifications, tick Pause this team.

A paused team sends you nothing, except when a session is cancelled, put back on or taken off the schedule. Untick it to get the team's notices again.

On the same page you can pick different kinds for one team: choose This team has its own settings, tick or untick the kinds, and choose Save for this team. A kind you turn off here stays on for your other teams. Use my usual settings goes back.

These settings are only yours. The coach can't change them.

Send a test

On the Notifications tab, choose Send a test. A test notice, "Notifications are on", goes to your inbox and to any phone signed in to your account. The page says "Sent to your phones." even when no phone is set up, so look at the phone. A test only comes to you, and it is sent whatever kinds you have ticked.

If the test is in your inbox but not on your phone, see below.

Notifications: if something goes wrong

  • Nothing arrives on my phone. Check that you're signed in to UmbraX Teams on the phone, and that notifications for UmbraX Pro are allowed in your phone's Settings. Open the app once with a connection, then choose Send a test in the web app. Check the kind is ticked, that you're not in your quiet hours, and that the team isn't paused.
  • Notices arrive at the wrong time. Check Time zone on the Notifications tab.
  • "The test could not be sent." Try again in a minute.
  • "One or more validation errors occurred." when you choose Save. Set both From and To or tick No quiet hours, and keep Your address under 200 characters.
  • No Leave by notice came. Check your address is saved and full enough to be found on a map, Leave by is ticked, the team isn't paused, and the session has a place.
  • "UmbraX Pro could not be reached. Check your connection and try again." The web app is offline.
  • A message with a number in brackets, like "That could not be saved (500)." Something went wrong on our side. Try again in a minute.
  • Still stuck? If you're 13 or over, use Contact support (see "Contact support"). If you're under 13, ask a parent or guardian.

UmbraX Teams: coaching tools

Plan a match (for coaches)

In UmbraX Teams, the Match plan tool makes a plan for one match from what you know about your team and the opponent. The plan is a set of diagrams with steps, and a PDF for your team. It is a starting point, not a script. Players still look up, read the game and choose.

To make a video of one idea, see "Make a video of one idea (for coaches)". To make drills from a diagram, see "Drills for your team (for coaches)".

A plan belongs to a team. The team's coach, coach assistants, and the club's owner and admins can open and change it. Only the coach, owner and admins share, archive or delete it.

Start a plan

  1. In the web app, open Tools, then Match plan.
  2. Choose New plan.
  3. Under Which team is this plan for?, pick the team. The plan opens. Match plans are for soccer teams. If you leave a new plan without answering a question or changing anything, it is removed after an hour.

You can also start from a match. On the match's day in your team's schedule, the Match plan card has Make the match plan.

Answer the planner's questions

The planner asks for facts only, one card at a time. It leaves out a question it can already answer.

  1. The match. If your calendar has matches coming, choose the one this plan is for, or choose Plan without the calendar. If the calendar has exactly one match coming, the plan takes it without asking. If it has none, choose Add the match to put one on the calendar (team, date, time, opponent, home or away, and an optional place), or Plan without the calendar.
  2. The opponent. For a plan with no match from the calendar, you can type the opponent, the date, the time, home or away and the place. All of it is optional. Choose Continue, or Skip.
  3. Last time. If your team has an earlier plan against the same opponent, the planner asks whether it is them. Yes, that's them takes their facts from that plan. Not them starts fresh.
  4. Their formation. Choose their shape, or Not sure.
  5. Their style. Choose every chip that fits, such as Press high or Long balls, then Continue. Or choose Not sure.
  6. What they do well, and where they leave room. Pick up to 3 of each, add anything else in the notes box if you like, then choose Next. You can leave it all empty.
  7. Your team. Pick the Age group, the Players a side and Our formation, then Continue. If the planner knows your formation from your last plan, it shows it as a quick check: choose All good or Change. If the planner can't tell how many players a side you play, it asks about your team earlier, before their formation.
  8. Choose Make the plan. It says Drawing the plan. Usually about a minute; keep this tab open.

If you tapped Not sure for their formation, the plan is about your own game, and the diagrams show an example opponent in a common shape for the age group. The opponent card says so. The planner never asks you for first names. Players are shown by shirt number.

Read the plan

The plan sits beside the chat (above it on a narrow screen). From the top:

  • Focus and Key messages: one line for the match, and three messages for the team.
  • Our game idea: one idea the whole plan follows, as three lines: With the ball, Without the ball and When the ball changes team. It can also show what you go after and what you guard against.
  • Train before the match: the ideas most worth a session before match day, each with Make drills (for the coach, owner and admins).
  • Opponent: what you told the planner about them.
  • If it isn't working: up to 3 changes for the match, each a When (what you see) and a Then (what you do), and At half-time, ask, the questions for the break.
  • The diagrams, in groups: Briefing, Build-up, Attack, Defend, Transitions, Set pieces and Special. Choose a group's line to open or close it, or use Open all and Close all. Younger age groups get fewer ideas and fewer groups.

The Briefing is one diagram with Tell the team, a short paragraph to read aloud at the team talk.

Some diagrams carry a tag:

  • Core: one of the plan's few main ideas. A plan has 3 at most.
  • Basic idea: a simple idea standing in. It says A basic idea. Try Another idea for one made for this match.
  • Your words: you edited this diagram, or it was redrawn from what you wrote.

Change the plan

Every change saves by itself. The bar at the bottom says Saving…, then Saved.

  • Edit words in place. Click the focus, a key message, a line of the game idea, a diagram's title, Why, a step, If it is closed or a player's job, and type. Press Enter or click away to keep it. Press Escape to put it back.
  • Move a player. Drag a player on a diagram's board. Their arrows follow. If a pass or run becomes longer than a match allows, the diagram says so. It is still saved, and you can drag the player nearer to fix it.
  • Another idea draws a different diagram in its place. On a diagram you edited, it first says Another idea replaces your edits to this diagram.
  • Change it opens a box. Say what to change in your own words, such as "press their 4 sooner", and choose Send.
  • The up and down arrows at the right of a diagram's buttons change the order inside a part. The bin beside them asks Remove this diagram? first.
  • More has Open in Match Studio, Make drills and Mark as core (or Not core). If the plan already has 3, it says A plan has 3 core ideas at most. Take Core off another diagram first.
  • The button in the corner of a board opens the diagram large, with its steps beside it.
  • Add a change adds a line to If it isn't working.
  • Add a part adds a part of your own. Type its name, such as "Against a high line", and the planner drafts it. It goes under Special.
  • The chat's box. Once the plan is made, say what to change, such as "make the defending part press higher", and the planner finds the diagram you mean. Enter sends. Shift or Alt and Enter starts a new line.

In the chat's box and in Change it, the Improve with AI button rewrites the words in the box so they are clearer. Nothing is sent until you choose Send. Undo puts your own words back.

After the planner changes a diagram, the chat says Not what you wanted? with Put it back. It puts the plan back as it was before that one change.

Choose the playbook for a plan

At the top of the chat, Playbook: names the playbook this plan follows. It starts on your team's default. Until the plan is made you can pick another of the team's playbooks, or the Built-in library. Once the plan has diagrams, the playbook is locked for that plan, and Open playbook shows it. See "Set up a playbook (for coaches)".

Give the result after the match

From the match day on, the top of the plan asks How did it go?

  1. Choose Give the score.
  2. Choose the goals for Us and for Them. Type the number if it is more than 9.
  3. If you like, choose Worked or Didn't work for each part of the plan, and add A note for next time (optional).
  4. Choose Save. The plan then shows the result, such as Result 2–1.

If the plan is for a match on your calendar, the score also shows on that match in your team's schedule. Your note and the Worked and Didn't work taps stay with the team's coaches.

Publish the plan and share it with your team

Publishing makes the plan's PDF. Your team sees nothing until the plan is on a session. Who on the team sees it is set in the team's Settings, under What families see: tick Players, Parents and guardians or both for Match plans, then choose Save what families see. A new team shares match plans with players only.

  • A plan with a match. Choose Share with the team. It makes the PDF and puts the plan on its match in one step. The bar then says On the match, with the date. Until then it says Not shared yet.
  • A plan with no match. Choose Publish. It shows Making the PDF… and then Published.
  • Download PDF saves the last PDF made.
  • Share puts a published plan on any training or match day of the plan's own team. Choose To a session, pick the session and choose Add to this session. On sessions lists where the plan is, each with Remove.

If you change the plan afterwards, it says Changed since you published. Choose Publish again. Your team sees the new PDF on every session the plan is on.

Only the team's coach, the owner and admins share a plan. A coach assistant sees Publish and Download PDF, and no Share with the team or Share.

Find, archive and delete plans

Match plan has three tabs.

  • Your plans lists your teams' plans, the next match first. Each says Draft, Published or Shared with the team. A played match with no result says No result yet.
  • Published lists the plans with a PDF, each with Download and Share.
  • Archived holds the plans you put away. Archive moves a plan there, and Restore brings it back. An archived plan still opens, and one on a session stays there.

Delete asks first. The plan's PDF goes too, and your team stops seeing it.

The logo on the diagrams

A plan shows the club's crest, if the club has one, faint in the centre circle of every diagram.

See your team's match plan

In the web app

On a match day, your team's schedule shows a Match plan card. Until your coach shares a plan, it says No plan yet.

When a plan is shared to a session, the day shows a Plans card. Your coach chooses whether players, and whether parents, see match plans. If you don't see the card, your team doesn't share plans with you. Ask your coach.

  • Plan PDF downloads the plan.
  • Coach's notes shows the Focus and the Key messages.

Staff also see Open the plan. The coach, owner and admins can choose Remove to take a plan off a session.

On your phone

In UmbraX Teams, open the Team tab and pick a match day in the schedule. If your team shares match plans with you, the day shows the Match plan card with the match. Until a plan is shared it says No plan yet.

  • Plan PDF opens the plan. You can share it from there. Once opened, it is kept on your phone and says Saved for offline.
  • Coach's notes shows Our plan today, the Focus and the Key messages.

A plan is made and shared in the web app. The phone only shows it.

Set up a playbook (for coaches)

A playbook is the tactics your match plans follow, written as text you can change. Each plan follows one playbook.

Open Tools, then Match plan, then Playbooks. If you have more than one team, pick the Team.

The Built-in library

The Built-in library is the tactics UmbraX Pro starts from. It is never changed. View opens it to read, and Sources shows where its text comes from. Clone makes your own copy to change.

Make a playbook

  • Clone copies the Built-in library, or one of your playbooks. Give it a Name, choose the team under Put it on, and tick Make it the team's default if new plans should follow it.
  • Import takes a playbook file, one that ends in .umbraxplaybook, and adds it as a new playbook on the team.
  • Export saves a playbook as a file you can keep or pass to another coach.

Change a playbook

Choose Open. A playbook has four parts:

  • Principles: how your team plays in Build-up, Attack, Defend, Transitions and Set pieces.
  • Matchups: your formation against theirs. Pick the Players a side first.
  • Their style: what to do against each style, such as a team that presses high.
  • Strengths and weaknesses: what to do about each thing an opponent does well, and each place they leave room. Use the search box to find one.

Choose a row to open its box, and type. Each box holds 800 characters and saves by itself. A box you changed is marked Edited. A box still in the library's words shows its Source. Improve with AI rewrites the words in the box so they are clearer, and Undo puts yours back.

Write about the team, not about one player. A box that names a player is not saved, and says Playbooks can't name a player.

Set the default, rename and delete

  • Make default makes a playbook the one new plans start on. It is marked Default.
  • Rename changes its name.
  • Delete asks first. Plans that used it keep their diagrams, and show the playbook's name with (deleted).

Who can change playbooks

The team's coach, the owner and admins change playbooks. Coach assistants can read them: the list says You can read these. Your team's coach, owner and admins change them. Players and parents never see playbooks.

Match plans: if something goes wrong

  • "That's the agent's limit for this hour. Try again a little later." You have asked the planner for a lot this hour. Your plan is kept. Try again later.
  • "You can start up to 20 plans a day." Open a plan you already started, or try again tomorrow.
  • "You can make up to 30 PDFs a day." Try again tomorrow. The last PDF you made can still be downloaded.
  • "This plan changed in another window." Someone else, or another tab, saved the plan first. Choose Reload, then make your change again.
  • "The plan changed while the planner was answering. Try again." A change was saved while the planner worked. Send your words again.
  • "The planner isn't answering. Try again." Choose Try again. Your words stay in the chat, marked Not sent.
  • "That didn't go through." on a diagram. Choose Try again on that diagram.
  • "The agent couldn't improve the words this time. Try again, or send them as they are." Your own words are still in the box. Send them, or choose the button again.
  • "That's a lot of improving this hour. Try again a little later." Your words are kept. Send them as they are.
  • "This board can't be drawn. Try Another idea or Change it." Use either button on that diagram.
  • "Couldn't publish." Choose Try again.
  • "A session holds 5 plans at most." Take a plan off that session first.
  • "The team is archived, so its plans can't be changed." An archived team's plans can still be read.
  • "Only the team's coach, owner or admins delete or archive its plans." Ask one of them.
  • "The plan is made, so it keeps its playbook." Start a new plan to follow another playbook.
  • "This playbook changed in another window." Choose Reload.
  • "A team keeps up to 20 playbooks. Delete one first." and "You can add up to 20 playbooks a day." Delete a playbook you don't need, or try again tomorrow.
  • "That file isn't a playbook. Pick a .umbraxplaybook file." Pick a file you saved with Export.
  • "Your club's plan for this team doesn't include this. Ask your club owner." Starting a plan and planning with the planner are part of the Complete level. The club's owner changes this on Billing (see "Club billing"). To see who that is, open the club and choose People.
  • A parent or a player can't see the plan. The team may not share match plans with them. See "Publish the plan and share it with your team" above. If you are the parent or player, ask your coach.
  • On the phone: "Couldn't open this. Try again when you're online." Connect to the internet and try again.
  • On the phone: "The PDF isn't made yet. Check again later." Your coach has just shared it. Check again in a few minutes.
  • On the phone: "The coach took this off." Your coach removed the plan from the match. Nothing is wrong with your phone.
  • A message about your club's plan. See "Club billing".
  • Still stuck? If you're 13 or over, use Contact support (see "Contact support"). If you're under 13, ask a parent or guardian.

Make a video of one idea (for coaches)

In UmbraX Teams, Match Studio turns one idea into a short video with a voice: players move on a pitch, one step at a time, while the voice says what happens. You can start from a diagram of your match plan, or from a blank pitch. Then you publish the video and share it to a training or a match day.

Your projects are your own. Other coaches don't see them until you share a video to a session.

Start a project

In the web app, open Tools, then Match Studio. It has three tabs: Your projects, Library and Published.

  • From a diagram. Open Library. It lists every diagram your match plans made, by group. Find one with the search box, the group chips or the plan picker, which starts on All plans. The list shows 10 at a time; use Previous and Next for the rest. Pick a diagram and choose Open in Match Studio. If you already made a project from it, you see Open your project and New project from this diagram.
  • From a blank pitch. Choose New project and pick the players a side: 5, 7, 9 or 11.

You can also choose More, then Open in Match Studio, on a diagram in your match plan.

A project from a diagram is a copy. Nothing you do in Match Studio changes your match plan.

Match plans are in "Plan a match (for coaches)".

Build the frames

A video is a Start and up to 20 frames. The start shows where everyone stands. Each frame is one thing that happens.

  1. Choose Start, and drag each player to where they begin. To say who has the ball, open a player's options and choose Give the ball.
  2. Choose Add a frame.
  3. Drag a player to where they go in this frame. Open the player's options to choose Run, Carry or Decoy run, or Stop moving here to take the move away.
  4. For the player on the ball, choose Pass to… and then choose a teammate or a spot on the pitch. Or choose Shoot. A frame has one pass or shot.
  5. Type the Voice line: what the voice says in this frame, up to 240 characters. The start has its own line, the Intro.
  6. Add the next frame, and carry on.

A player you don't move in a frame stays where they are.

To open a player's options, right-click the player, press and hold on a touch screen, or select the player and press Enter. There you can also change the Number, add a Name (optional) that shows on the player's disc, or Remove the player.

For a picked frame, Duplicate copies it, Move left and Move right change the order, and Remove asks Remove this frame? Its words and moves go too.

Set a frame's length and pass

  • Length is Auto: as long as the line and the moves need. You can type Seconds instead, from 1 to 20.
  • Lofted makes the pass go through the air. Clear the pass or Clear the shot takes it away.
  • Shift with the ball moves the other players across with the ball. It is off unless you turn it on.

Add to the board

Add to the board has:

  • Players: Add our player, Add their player, and Add a formation for either team. Adding a formation asks before it replaces that team's players. The board holds 22 players at most.
  • Props: Cone, Mini-goal and Label.
  • Zones: a coloured area. Drag its handle to resize it.
  • Grid: Thirds and channels shows or hides the lines.
  • Colours: Our colour and Their colour.

Drag anything to move it. The arrow keys move the selected item 1 m (about 3 ft), and Delete removes it. Keys lists every keyboard shortcut.

Marked frames

Match Studio checks each frame. A frame is Marked when it has a pass, run or carry longer than matches usually have, a player or the ball off the pitch, or more players than the format allows. The frame says which.

A mark never stops you. You can publish with marked frames. The video panel says Some frames are marked. You can still publish.

What the voice says

The voice says numbers, not names. A name you add to a player shows on their disc only. Write the voice lines with numbers, such as "7 passes to 9". When you publish several videos at once, a line that says a name on a disc is left out with A voice line says a player's name. The voice says numbers, so take the name out first.

Saving, Undo and Redo

Your project saves by itself a moment after you stop. The top bar says Saving…, then Saved. Undo and Redo step back and forward through your changes.

If the project came from a diagram and the diagram has changed since, the editor says The diagram changed. Rebuild the frames? Rebuild asks first: it replaces the players, labels, zones and frames with the diagram as it is now, and it can't be undone. If the diagram was deleted, it says This came from a diagram that was deleted. The project still works.

Preview the video

Choose Preview. The video plays in the board's place, with captions and no voice. The voice is made when you publish. Play this frame plays one frame. Back to editing closes the preview.

Publish the video

  1. Choose Publish.
  2. The video panel shows Waiting, Voicing…, Making the video… with a percentage, and then Ready. You can leave the page while it works.
  3. Choose Download video to save it, or Share to put it on a session.

If you change the project afterwards, the panel says Changed since you published. Choose Publish again for a new video. A video already on a session is replaced by the new one.

In Your projects, each project says where its video stands: Not published, Being made, Published, Out of date or Publish failed.

You can publish 10 videos a day. Publishing a project again when nothing changed doesn't use one.

Publish several at once

  1. In Library, choose Select to publish.
  2. Tick up to 5 diagrams. One whose video is already published as it is, or is being made, can't be ticked.
  3. Choose Review and publish. Each one is checked first. One that can't be published says why, such as The diagram changed. Open the project and Rebuild first., and is left out. One with marked frames is left out until you tick Publish anyway. Use Leave out and Put back for the rest.
  4. The window says how many of today's videos this uses. Choose the publish button.
  5. Choose See your videos to go to Published.

A diagram with no project yet gets a new project made from it.

Share a video to a session

A published video reaches your team when you put it on a training or a match day.

  1. In Published, or in the project's video panel, choose Share.
  2. Choose To a session.
  3. Pick the Team. The window lists Sessions in the next 8 weeks. You can show only trainings or only matches.
  4. Choose Add to this session.

On sessions lists where the video is, each with Remove. Removing asks Take this video off the session? The team stops seeing it.

To put several videos on one session, choose Share several to a session in Published, tick up to 10, choose Pick the session, then Check and share. The window says if a video is from another team's plan or a plan against another opponent, so you can check before you confirm.

A session holds 10 videos at most. The team's coach, the owner and admins add videos to its sessions.

Delete a project

In Your projects, choose Delete. It asks first. The project's video goes too. Sessions the video was added to keep it.

You can keep 200 projects, and start 30 new ones a day.

Watch your team's videos

When your coach shares a video to a session, everyone who sees the team's schedule can watch it: the players and their parents.

  • In the web app. The session's day on your team's schedule shows a Videos card. Choose Play.
  • On your phone. In UmbraX Teams, open the Team tab and pick the session's day in the schedule. The Videos card lists that day's videos. Tap one to play it. It needs the internet the first time.

The coach, owner and admins can choose Remove on the web card to take a video off a session.

Match Studio: if something goes wrong

  • "You can publish up to 10 videos a day." Try again tomorrow. Your project is kept. When you publish several at once, the window says You have no videos left today. or how many are left, with Untick some.
  • "You can start up to 30 projects a day." Open a project you already have, or try again tomorrow.
  • "You can keep up to 200 projects. Delete one first." Delete a project you don't need.
  • "The video couldn't be made." Choose Try again. If you made a video before, Download video still gives you that one.
  • "This project changed in another window." The project was saved somewhere else first, for example in another tab. Choose Reload to take that version, or Keep mine as a new project to keep what is on your screen as a copy.
  • "Your sign-in ended, so this isn't saved." Choose Sign in again. Your change is kept in this tab and saved when you come back.
  • "Not saved." followed by a reason. Fix what the reason says. Rebuild from the diagram as it is now. means the diagram changed: choose Rebuild.
  • "The board holds 22 players at most. Remove one to add another." Remove a player first.
  • "A project holds 20 frames at most. Remove one to add another." Remove a frame first.
  • "Publish the video first." A video has to be made before it can go on a session.
  • "A session holds 10 videos at most." Take a video off that session first.
  • "Only the team's coach, owner or admins can add videos to its sessions." Ask one of them to share it.
  • "That diagram isn't in the plan any more." The diagram was removed from the match plan. Pick another, or start from a blank pitch.
  • "Your club's plan doesn't include this. Ask your club owner." Match Studio is part of the Complete level. The club's owner changes this on Billing (see "Club billing"). To see who that is, open the club and choose People.
  • On the phone: "Couldn't open this video. Try again when you're online." Connect to the internet and try again.
  • On the phone: "The videos could not be loaded. Pull down to try again." Pull down on the Team tab.
  • A message about your club's plan. See "Club billing".
  • Still stuck? If you're 13 or over, use Contact support (see "Contact support"). If you're under 13, ask a parent or guardian.

Drills for your team (for coaches)

In UmbraX Teams, the Drill designer keeps your team's drills in collections. You can take a drill from the library, have drills made from a diagram of your match plan, or draw your own. Each drill gets a video with a voice, and you share it to a training or a match day.

In the web app, open Tools, then Drill designer. It has four tabs:

  • Team collections: your teams' collections. Open one to change its drills, publish them and share them.
  • From a diagram: the diagrams of your match plans, to find or make drills for.
  • Library: drills ready to use, each with its video.
  • Your drills: the drills you saved to your own account.

Find or make drills for a diagram

  1. Open From a diagram. It lists the diagrams of your teams' match plans, by group. Use the group chips, the team and plan pickers or the search box to find one. The list shows 10 at a time; use Previous and Next for the rest. You can also choose Make drills on a diagram in your match plan (under More) or in Match Studio's Library.
  2. Pick a diagram. Its board shows, with two buttons.
  3. Find drills shows the library drills that train the diagram's idea. Picked for this diagram lists the best fits, each with its type. All drills for this moment lists the rest by type. If none fits your format, it says No exact fit. The closest:. Choose a drill to open its page, then Add to collection.
  4. Make drills makes new drills from the diagram. It says Making the drills… and takes about a minute, then opens a new collection named after the diagram and the opponent. Make drills works on Build-up, Attack, Defend, Transitions and Set pieces diagrams.

Make drills picks 2 or 3 types of drill for the idea, ordered from easier to harder:

  • Shadow play: the move step by step, with no defenders.
  • Numbers up: more of us than them, so the move works.
  • Keep-away: keep the ball under pressure, then find the way out.
  • Attack vs defense: our unit against theirs, to a real goal.
  • Live: for set pieces, the routine against defenders.

Where the library already has a drill that fits, the collection gets a copy of it, marked From the library. The other types are written for you on the collection's page, under Being made. Each takes about a minute. Keep the page open until they are done. A card says Writing the drill…, sometimes Fixing what didn't play right…, then Saving it…, and then becomes a drill. If one says This drill couldn't be made., choose Try again, or Remove to drop it.

Read every new drill before you publish it. Check it suits your players' age and the space you have.

Take a drill from the library

  1. Open Library. Pick a phase with the chips, and a format, such as 11 a side, if you like.
  2. Choose a drill. Its page shows the video, Why this drill, Players needed, How it runs, Coaching points and Watch for. A drill that ends in a game shows its rule under Small-sided game.
  3. Choose Add to collection to put it in one of your team's collections as it is, or Clone to edit to open your team's copy in the designer and change it.
  4. Pick the team and the collection, or a new collection, and choose Add (or Clone and open). The drill is your team's own copy. It is not on phones or sessions yet: choose Publish on its card in the collection first. If you haven't changed it, publishing uses the library's video.

Only the team's coach, the owner and admins add library drills to its collections.

Work on a collection

On the collection's page, each drill is a card. It shows the layout, the drill's type, Why this drill and Players needed, such as Game: 3v3+2 (3 players against 3, plus 2 neutrals).

  • Rename changes the collection's name. Delete collection deletes its drills and their videos too, and takes them off every session they are on.
  • Open in designer opens a drill to change it. See "Change a drill in the designer" below.
  • The up and down arrows change the order. Remove takes a drill out. A published drill you remove comes off your team's phones and sessions at once, with its video.
  • Add a drill has Blank (a small area with four cones), Copy (a copy of a drill in the collection) and Another idea (a new drill from the same diagram, marked See it, Read it or Win it). A collection holds 12 drills at most.

If the diagram changes after the drills were made, the collection says The diagram changed. The drills stay as they are. Another idea makes a new drill from the diagram as it is now. If the diagram is deleted, the collection says The diagram this came from is gone. The drills still work, but you can't add another idea.

Publish a drill

Each drill has its own Publish button on its card. There is no button for the whole collection.

  1. Choose Publish. The card shows Waiting, Voicing…, Making the video… and then Ready. Publish is off while the video is being made.
  2. Choose Watch the video to see it.

If you change the drill afterwards, its card says Changed since you published. and has Publish again. If it says The video couldn't be made., choose Try again. A drill you haven't published says Not published and isn't on the phone.

Your account can make 20 drill videos a day. When they are used up, the card says That's all the videos for today. Try again tomorrow. and publishes nothing. Your team's staff see a published collection on their phones, and each video once it's made.

Share a drill to a session

  1. On a published drill's card, choose Share to a session.
  2. Choose To a session, pick a training or match day and choose Add to this session.
  3. Do this for each drill you want on that day.

The same window shows where the drill is already, and you can take it off a session there. A session holds 12 drills at most. Who on the team sees a session's drills is set in the team's Settings, under What families see: tick Players, Parents and guardians or both for Drills, then choose Save what families see. A new team shares drills with players only.

Start a drill from nothing

Choose New drill. If you coach a team, it asks Who's this drill for?

  • Just me: a drill of your own, with laps, sets and your times. It is on your phone under Individual.
  • My team: a team drill with players needed and a video, shared to a session. Pick the Team and a Collection, or New collection with a name and an optional group, then choose Start drawing.

Change a drill in the designer

A team drill in the designer has two views.

  • Layout is the ground with its lengths, and the drill's settings: the cones and other objects, the markings, the players needed and the steps. In How it's done, Improve with AI rewrites the lines in a box so they are clearer, and Undo puts yours back.
  • Play is the drill's video. Choose the add-a-player button in the tool rail and choose Ours, Theirs or Neutral, then click the grass. On Start, drag each player to where they begin. Choose Add a frame for each thing that happens, drag a player to where they go, and click a player to pass or shoot. Type what the video says in each frame. A video has up to 12 frames and up to 22 players. Preview plays it with captions. The voice is made when the drill is published. A drill from the library says From the library. Change the play and the video is made from your frames when you publish. Until you change the play, its video is the library's.

Choose Save to the collection when you are done. If it says This drill changed in another window., choose Reload and make your change again.

Mark the lines of a game

With the designer's add-a-marking button, draw a line, a rectangle or a circle on the grass (or press 8, 9 or C). Pick What it marks: Boundary is the edge of the playing area (a drill has one), Split is a line across it, such as halves, and Zone is a part with its own rule, such as an end zone. You can add a Label (optional) of up to 20 characters, such as End zone. Never put a name in it. A drill can have up to 20 markings.

In the Players section, choose Add the game's numbers and set Ours, Theirs and Neutrals. Neutrals play for whoever has the ball. Each team needs 1 to 20 players, and neutrals are 0 to 20. The drill's card then says, for example, Game: 3v3+2, and the board shows neutral players in their own colour.

Who can change team drills

Your team's coach, owner and admins make, change, rename, delete, publish and share the drills, and take a drill off a session. Coach assistants can read them, open a drill in the designer to look, see each video's state and watch the videos. They can't change anything.

See and set up your team's drills on your phone

When your coach shares drills to a session, the Team tab shows them as Today's drills (or Next session's drills) for the team's next session with drills. Your coach chooses whether players, and whether parents, see the team's drills. If your team shares them with you and none are on a session yet, Drills for the day says No drills yet. Tap a drill to open it:

  • Watch the video plays the drill's video, with a voice. It needs the internet the first time, then it plays offline. Your phone also saves videos ahead by itself when it is on a network that doesn't use your data, and a saved one says Saved for offline. A drill with no video yet doesn't show Watch the video, and says No video for this drill yet.
  • Players says how many players it needs, such as 8 to 12 players · 3v3+2 (3 players against 3, plus 2 neutrals who play for whoever has the ball), and their roles, such as Attacker 1 or Server.
  • How to do it has the steps, the coaching points and the common mistakes.
  • Set it up on the field opens your camera and shows on the ground where each cone goes, the same as for your own drills (see "Set up a drill on the field"). If the drill has lines, it shows them on the ground too, and says Put discs on the white dots to mark the lines.

Your team's coach, owner, admins and coach assistants also see Team collections, the team's published collections, in Drills for the day. Players, parents and a child's phone see only the day's drills.

In the web app, the team's schedule shows the day's drills too, in a Drills card, if your team shares drills with you. How it runs opens the drill's board, players, steps, coaching points and what to watch for, and Video plays its video.

Team drills aren't timed or scored, no set is saved for them, and they don't go into My drills.

Team drills: if something goes wrong

In the web app

  • "That's a lot of drills this hour. Try again a little later." You have asked for a lot of drills this hour. Wait and try again. Find drills and Another idea have the same kind of message.
  • "A team keeps up to 50 drill collections. Delete one first." Delete a collection you don't need.
  • "A collection holds 12 drills at most." Remove a drill first. Drills still being made count.
  • "This drill couldn't be made." Choose Try again on that card, or Remove.
  • "The drills couldn't be made. Try again." Choose Make drills again.
  • "The video couldn't be made." Choose Try again on that drill's card.
  • "That's all the videos for today. Try again tomorrow." You have made 20 drill videos today.
  • "This drill changed in another window." Choose Reload and make your change again.
  • "Another collection on this team has that name." Pick another name.
  • "The diagram is gone, so there is no other idea to make." The diagram was deleted. Use Blank or Copy.
  • "A session holds 12 drills at most." Take a drill off that session first.
  • "The team is archived, so its drills can't be changed." An archived team's drills can still be read.
  • "Your club's plan for this team doesn't include this. Ask your club owner." Make drills is part of the Complete level. The club's owner changes this on Billing (see "Club billing"). To see who that is, open the club and choose People.

If a drill is not on the phone

  • Drills for the day says No drills yet. Your coach hasn't shared drills to a session yet. Ask your coach to publish them and use Share to a session.
  • There is no drills card at all. Your team doesn't share drills with you. A coach can change that in the team's Settings, under What families see.
  • One drill is missing. Each drill is shared on its own. Your coach needs to publish it, then use Share to a session on that drill.
  • A drill has no video. The video is still being made. Check again later.
  • A removed drill is still there. Pull down on the Team tab to load the drills again.
  • "The drills could not be loaded. Pull down to try again." Pull down on the Team tab. Showing last saved. means there is no signal, and the phone is showing what it saved last time.
  • "Couldn't open the video. Try again when you're online." Connect to the internet and try again.
  • "The coach took this off." Your coach removed the drill. Nothing is wrong with your phone.
  • "Sign in again to see this." Sign out of UmbraX Teams and sign in again.
  • Still stuck? If you're 13 or over, use Contact support (see "Contact support"). If you're under 13, ask a parent or guardian.

Your team's documents

In UmbraX Teams, each team has a Documents page in the web app: "Waivers, forms and team info for this team." Each document is a file with a title, a line on what it is for, and a kind: Waiver, Form, Team info or Other.

Team documents are in the web app. The phone app doesn't show them yet, so open the web app in your phone's browser if you need one on the go.

Who sees them

Everyone on the team: the staff, the players, and the parents and guardians of players under 18. The club's owner and admins see them too.

Find the documents

Choose Documents:

  • on your dashboard, beside each team in Teams you follow
  • on your dashboard, beside each child's team in Your players
  • at the top of your team's schedule
  • on the team's page, if you're on its staff

Download a document

Choose Download beside it. The file is saved to your device under its own name. Each document shows its file name and size, and who added it.

Add, change or remove a document

The team's coach and team manager, and the club's owner and admins, can do this. Coach assistants, players and parents can read and download only.

Before you upload

The page says this above the list, and it matters:

"Everyone on the team can see this. Don't upload medical records, ID documents, payment details or anything else private. Only upload what the team needs and has agreed to share."

Add a document

  1. Open the team's Documents page and choose Add a document.
  2. Give it a Title, such as "Waiver 2026".
  3. Under What is it for?, say what people should do with it, such as "Sign and return before the first match."
  4. Pick the Kind.
  5. Choose the File: "A PDF, PNG, JPEG or Word document, 4 MB at most." A Word document is a .docx file.
  6. Choose Add.

A title can be up to 80 characters, and what it is for up to 400. A team keeps 50 documents at most.

Change a document

Choose Edit beside it, change the title, what it is for or the kind, and choose Save. Editing doesn't replace the file. To put up a new version of the file, remove the document and add it again.

Remove a document

Choose Remove. The page asks first, because the file goes too.

What team documents are not

  • Not a place to sign. People download a form, fill it in and give it back to the coach the way the coach asks.
  • Not a record of who read or returned it. The page doesn't show who opened or downloaded a document.
  • Not private to some people. Every document is for the whole team. You can't show one to only some players or parents.

For how files are kept and deleted, see the Privacy Policy.

Team documents: if something goes wrong

  • "These documents aren't open to you." You aren't on this team right now. The coach may have taken you or your player off the team, or the team may be archived. Choose Go to your dashboard, and ask your coach if you think it's a mistake.
  • "Use a PDF, PNG, JPEG or Word document." The file is another kind, or its contents don't match its name. Save it as a PDF and try again.
  • "Use a file of 4 MB or less." Make the file smaller, or split it in two.
  • "A team keeps 50 documents at most." Remove one you no longer need.
  • "Give the document a title." or "Say what the document is for." Both boxes need words.
  • "Only the team's manager, coach or the club's owner or admins can change its documents." Ask one of them to add or change it.
  • "The team is archived, so its documents can't be changed." The club's owner or an admin can restore the team.
  • "The file could not be downloaded." or "UmbraX Pro could not be reached. Check your connection and try again." Check your internet. If the list didn't load, choose Try again. If a download failed, choose Download again.
  • A message about your club's plan. See "Club billing".
  • Still stuck? If you're 13 or over, use Contact support (see "Contact support"). If you're under 13, ask a parent or guardian.

Contact us

Contact support

If something isn't working, or you have a question about your account, your team or your club's billing, you can write to us. We answer by email, or by phone if you add a number.

A question about your schedule, or who is on your team? Ask your coach first. Your team's Roster lists the coach.

If you are under 13, ask a parent or guardian to write for you.

Write to us in the web app

  1. Open Help in the web app and choose Contact support. If you are signed in, you can also open your dashboard and choose the Support tab. It is the same form.
  2. Fill in Your name and Email. We answer at that email. If you are signed in, both are filled in for you, and you can change them. If you are not, you type them. Sign in on the form fills them in.
  3. Phone (optional): add a number if you'd like us to be able to call.
  4. Under What's it about?, pick one: Signing in or my account, My team, Billing, Something isn't working or Something else.
  5. Under What happened?, say which screen you were on and what you expected. You have 2000 characters, and the form counts them.
  6. Choose Send. It stays off until you have given a name, picked what it's about and written a message. Signed out, it also needs an email.

We get your message, your name, email and phone. Don't send passwords or card numbers.

After you send

The page says Sent and gives you a ticket number, for example "Ticket #1042. We'll answer by email." Keep the number in case you write again. Send another opens a new form.

There is no thread to follow in the web app or on your phone. The answer comes to your email, or by phone if you gave a number.

If it won't send

The form tells you what to fix:

  • "Add an email we can answer at."
  • "Enter a phone number with 7 to 15 digits, or leave it blank."

If you have sent several messages already:

  • Signed in, you can send 5 a day. After that you see "You've sent a lot today. Try again tomorrow."
  • Signed out, you can send 3 an hour. After that you see "That's a lot of messages. Try again in an hour." On a very busy day you may see "You've sent a lot today. Try again tomorrow." instead.

If the form says "UmbraX Pro could not be reached. Check your connection and try again.", what you typed is still there. Check your connection and choose Send again.

Write to us from your phone

In UmbraX Teams, signed in:

  1. Open Profile.
  2. Choose Contact support, below Help.
  3. Your Name, Email and Phone (optional) are filled in from your account when they can be read. Change them if you need to.
  4. Pick What's it about? and write your Message. You have 2000 characters.
  5. Choose Send.

You see "Sent." with your ticket number, for example "Sent. Ticket #1042.", and "We'll answer by email." Choose Done to close it.

From the phone we get your message, your name, email and phone, and the app's version.

If you have no signal you see "Couldn't send. Check your connection and try again. Your message is still here." Nothing is saved for later, so send it again when you are back online.

Contact support isn't shown when you are signed out, and it is never shown on a child's phone. A parent or guardian can write from their own account or from the web app.

In UmbraX Pro

UmbraX Pro has no account, so it has no Contact support form. In Profile, under Legal, Report a problem opens an email to us. Players under 13 don't see it: a parent or guardian can write from the web app.

Contact us

If you're 13 or over, tap Report a problem in Profile (under Legal), or at the bottom of Help in the app. It opens an email to us with the app's version filled in, and nothing is sent until you send it. You can also email contact@blueorc.tech. If you're under 13, or the app is still in child mode, ask a parent or guardian to email us.

Use it to tell us about an injury, a drill that looks unsafe or wrong, or anything that isn't working. We read every message.